New NC30/35 Eccentric hubs - any interest...?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
User avatar
RickOliver
Site Supporter
Site Supporter
Reactions:
Posts: 477
Joined: Sun May 11, 2008 8:55 am
New NC30/35 Eccentric hubs - any interest...?

Post by RickOliver » Fri Jan 18, 2019 9:37 am

Just putting out a feeler here -

With so many NCs having trashed rear hub eccentrics due to owner brutality and laziness (why spend £20 on the right spanner when you can wreck a £300 hub with a screwdriver and a big hammer...) and OEM replacements now discontinued, I`m thinking it might be time to start producing new ones.

What I have in mind is a hub which is machined from an alloy billet rather than a casting like the original, might with luck and cunning design be a bit lighter and which will have a more robust adjusting system - I`m thinking probably a wider flange than the original castellated rim, with radial drillings round the edge and a custom peg spanner supplied to match.

This won`t be cheap, but if I could supply the above for the same price or a bit less than the OEM part (which was £310 from Honda when last available), would anyone be interested...?

Rick

ZippiT
Settled in member
Reactions:
Posts: 30
Joined: Mon Oct 16, 2017 6:16 am
Re: New NC30/35 Eccentric hubs - any interest...?

Post by ZippiT » Sat Jan 19, 2019 1:32 am

If it's cheaper then the Ti one ;) I'm keen.

User avatar
TZcRank
NWAA Supporter
NWAA Supporter
Reactions:
Posts: 79
Joined: Wed Apr 18, 2018 5:54 am
Location: JHB - South Africa
Re: New NC30/35 Eccentric hubs - any interest...?

Post by TZcRank » Sat Jan 19, 2019 7:18 pm

I would be interested!!

Suzuki416
Settled in member
Reactions:
Posts: 228
Joined: Fri Aug 26, 2016 10:17 am
Bike owned: 3 x NC35, 3x NC24, NC29, RC46
Location: London
Re: New NC30/35 Eccentric hubs - any interest...?

Post by Suzuki416 » Sun Jan 27, 2019 2:55 pm

me too

User avatar
RickOliver
Site Supporter
Site Supporter
Reactions:
Posts: 477
Joined: Sun May 11, 2008 8:55 am
Re: New NC30/35 Eccentric hubs - any interest...?

Post by RickOliver » Thu Feb 07, 2019 2:57 pm

Here`s the first prototype in the metal, fresh from the mill - we had to abandon the original idea for the adjusting ring due to lack of space behind the sprocket carrier so the final version has the same castellated profile as the original but the flange is twice as wide (6mm) which should give better grip and durability and will also work with the standard adjusting wrench.

Image

Image

Image

I will post more pictures shortly of the finished item, anodised and with bearings/seals fitted...

Rick

User avatar
RickOliver
Site Supporter
Site Supporter
Reactions:
Posts: 477
Joined: Sun May 11, 2008 8:55 am
Re: New NC30/35 Eccentric hubs - any interest...?

Post by RickOliver » Thu Feb 07, 2019 3:37 pm

...and here`s the progress so far - hub anodised, new bearings & circlips fitted but still awaiting the arrival of the seals which should have been delivered last week...

Image

Image

dirty30-2008
Settled in member
Reactions:
Posts: 51
Joined: Thu Jul 01, 2010 12:16 pm
Bike owned: NC 30, TZR 250
Location: Portsmouth
Re: New NC30/35 Eccentric hubs - any interest...?

Post by dirty30-2008 » Fri Feb 08, 2019 10:13 am

Masterpiece. Looks so good I wish I needed one!

User avatar
CMSMJ1
Moderators
Moderators
Reactions:
Posts: 7150
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: New NC30/35 Eccentric hubs - any interest...?

Post by CMSMJ1 » Fri Feb 08, 2019 4:23 pm

That is very cool indeed. Lovely
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

cbr400rrn
Site Supporter
Site Supporter
Reactions:
Posts: 752
Joined: Tue Apr 29, 2008 9:37 pm
Bike owned: NC29 CBR600F
Location: Lancashire
Re: New NC30/35 Eccentric hubs - any interest...?

Post by cbr400rrn » Fri Feb 08, 2019 9:26 pm

Nice one Rick, dare I say it. But i now wished i had an nc35 just to fit this to

ArizonaRVF
Settled in member
Reactions:
Posts: 29
Joined: Sat Jan 26, 2019 1:09 pm
Bike owned: 1994 RVF400R
Location: Desert Southwest USA
Re: New NC30/35 Eccentric hubs - any interest...?

Post by ArizonaRVF » Fri Feb 08, 2019 9:50 pm

I'm liking the understated look of the silver anodizing, Looks better every time I see it, Rick.

Just a couple of seals away, so close.....phenomenal effort.


Post Reply