My Beastie/ project
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 84
- Joined: Fri Jun 19, 2015 6:14 am
Re: My Beastie/ project
Does anyone know of anyone who has the autorimessa exhaust kit who would be willing to take really good measurements?!
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: My Beastie/ project
There's a 4-2-1 full system in black mold steel for cheap money.
-
- Settled in member
- Reactions:
- Posts: 84
- Joined: Fri Jun 19, 2015 6:14 am
Re: My Beastie/ project
Mold steel?! Hey vvs is it true you made some up for yourself?!
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: My Beastie/ project
Yes mate I made a few.
I was going to get some done but sandybikes made a batch so I never bothered.
Problem was all the pipe bending companies only work in 1.5mm and I was looking for 1mm for a track system and 1.2mm max for road, and the pipe ends up weighing a ton.
Local company were happy to do them but I had to buy the tooling and at £500 a set it was not workable.
If you want to do your own from pre bent sections Good fans can custom bend, any thickness in any material but they are Not cheap, f1 stuff.
I was going to get some done but sandybikes made a batch so I never bothered.
Problem was all the pipe bending companies only work in 1.5mm and I was looking for 1mm for a track system and 1.2mm max for road, and the pipe ends up weighing a ton.
Local company were happy to do them but I had to buy the tooling and at £500 a set it was not workable.
If you want to do your own from pre bent sections Good fans can custom bend, any thickness in any material but they are Not cheap, f1 stuff.
-
- Settled in member
- Reactions:
- Posts: 84
- Joined: Fri Jun 19, 2015 6:14 am
Re: My Beastie/ project
Thanks for the info. Where you going of drawings or a set you already had?!
Cheers
Nobbsie
Cheers
Nobbsie
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: My Beastie/ project
Sorry that should read Goodfabs not good fans, stupid new phone keeps changing words as i post.
I made a jig using a set i had, think they were Yoshi.
Chris who was doing the 500cc 73a made some from pre bend, take a look at his post.
I made a jig using a set i had, think they were Yoshi.
Chris who was doing the 500cc 73a made some from pre bend, take a look at his post.
-
- Settled in member
- Reactions:
- Posts: 84
- Joined: Fri Jun 19, 2015 6:14 am
Re: My Beastie/ project
Been searching everywhere for his project thread but can't find it anywhere is it still there?!
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: My Beastie/ project
CHRI5 was his user name, happens to live close to me, Stoke area.
-
- Settled in member
- Reactions:
- Posts: 84
- Joined: Fri Jun 19, 2015 6:14 am
Re: My Beastie/ project
Yea when I look up his posts only 20 show up!!!! I looked through the workshop section and it's not there.....
- Variablevalves suck
- Site Supporter
- Reactions:
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: My Beastie/ project
Think the post was in the non site supporting part that gets dumped if it goes off the page.