cb400sf nc31 top box rack / luggage rail

[Japchap]

Superjack44, thanks for the pics you posted. It's good to have options...

[mushroom]

I need a rack fora '92 SF
Anyone got any links to any sites selling ?

[Patch29]

Hi Mushroom, try Kenma, they make a Ventura Rack for the 92sf, I have one as well...

Will see if I can find link for you...

Sent from my CPH1607 using Tapatalk

[Patch29]

Part kit from Ventura for the 92-96 CB400 is H094PF
This is the l brackets and rack..
Link is www.kenma.com.au and choose the Ventura tab

Sent from my CPH1607 using Tapatalk

[mushroom]

Thanks for the reply, I'm in the UK and those Ventura racks are expensive https://www.ventura-bike.co.uk/fitments ... nc_31.aspx
They emailed me back the other day and it worked out over £150

I've been googling and found that the Givi 241F monorack arms fit and that's a third of the price
https://www.sportsbikeshop.co.uk/motorc ... rod/206650

[Japchap]

A follow-up on my original post back in 2013... I found a locally made top-box base which is off the same blue-print as the factory specs etc.

I'll send some pics soon...
Haven't been on my bike since January 2015 as the result of an accident with a taxi.
The bike is officially written-off but actually I'm currently breathing life back into the bike as the frame was not damaged so much.

Now as I have had the inevitable accident, the slow-motion flight was quite the experience...
Only significant negatives for me were losing my bike as a practical mode of daily transport... losing my confidence to be on the same road as taxi drivers who like to do sudden U-turns in front of oncomeing traffic... the five months I spent with a moon boot in pain due to the broken small bone beneath my right ankle...

...it could have been worse... it could have been much worse...

Photos soon

Cheers

[cb400f1]

I broke two of those Ventura racks. They are not designed for a top box & intended to carry a pair of waterproofs at best . Webike in Japan has quite a few carriers but mainly for NC39/42's.

[mushroom]

I broke two of those Ventura racks. They are not designed for a top box & intended to carry a pair of waterproofs at best . Webike in Japan has quite a few carriers but mainly for NC39/42's.

That's good to know as my wife uses a large capacity twin helmet sized Givi normally

I'll go for those Givi bars and top plate

[mushroom]

OK all sorted now
Givi 241F arms for a '95 CB500
Givi M3 top plate
Givi Maxia topbox

You have to make slots in the plastic seat undertray to make the arms line up correctly with the holes

IMG_20171119_132953 by Dave Gale, on Flickr

[karltheboy]

here is another rack but one off the shelf https://recraftmoto.com/luggage-equipme ... 1992-1998/