TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
- Yakama
- Site Supporter
- Reactions:
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Any update on the 57mm?
-
- Familiar Member
- Reactions:
- Posts: 288
- Joined: Thu May 29, 2008 5:58 am
- Bike owned: VTR-250, VFR400RR,
- Location: Santa Clara County, California, USA
- Contact:
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Sorry for the long silence. It's the "Holidays" here in the States. Bahh Humbugh!!!Yakama wrote:Any update on the 57mm?
At the turn of the year (in a few weeks), I plan to order a batch of 57mm pistons. I just don't know how large yet. I am trying to get enough funds together to order a full 48 pistons to:
A): Keep the prices where we originally agreed
B): Have pistons on the shelf for those who were not able to get them at this time, but would really like to get them in the future. This is a big risk as I can't guarantee that they will all sell. But, I am really hoping that in the next 12 months at least 10 of you want 57mm pistons.
And, as a side note: I have 3 sets of 56mm Cosworths "on the shelf" right now, ready for shipping in the States, and Rick Oliver has the rest of them "on the shelf" right now, ready for shipping in the UK. These are for those that are limited to +1.00mm oversized for their race organizations.
Again, sorry for the wait. But, I really promise you, the first time you twist that throttle with the pistons, the smile-factor will be off-scale
Mike Norman
G-Force Engine Development
www.mngforce.com
There is no such thing as "Too Fast"
- Yakama
- Site Supporter
- Reactions:
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Any update Mike?
-
- Familiar Member
- Reactions:
- Posts: 288
- Joined: Thu May 29, 2008 5:58 am
- Bike owned: VTR-250, VFR400RR,
- Location: Santa Clara County, California, USA
- Contact:
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
The 57's are on order. I'm in contact with Cosworth now to get a better update on when we can expect them. It's the busiest time of year for all racing-oriented companies.Yakama wrote:Any update Mike?
I really appreciate everyone's patience with this. I had to front nearly $20,000 of my own savings for 12 engine sets to make this happen. So, I sure hop I can sell The remaining 9 sets (3 sets already spoken for). It took me a while to come up with the money.
I will be back with updates as soon as I know more.
Mike Norman
G-Force Engine Development
www.mngforce.com
- Yakama
- Site Supporter
- Reactions:
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
-
- Familiar Member
- Reactions:
- Posts: 288
- Joined: Thu May 29, 2008 5:58 am
- Bike owned: VTR-250, VFR400RR,
- Location: Santa Clara County, California, USA
- Contact:
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Hi All:
I am very sorry that I have not been active on here. I have been struggling to get a smaller-than-normal engine workload done while suffering from continued back pain. It looks like I am going in for Surgery #7 in the near future.
Now, for the good news
The Cosworth 57mm pistons were ordered in January of 2017. I ordered 48 pistons (12 engines sets) with 4 sets at the STD pin height (and 2 of those sets are already spoken for), and the rest at the HRC pin height (requiring +3.0mm longer rods). If you think you missed out on the order period, now is your FINAL CHANCE EVER to get these pistons. With what I have gone through, I will not do this again. I am doing this because, I believe with all my heart, once you twist the throttle with these pistons in your engine, your love for the awesome little V4 will be renewed with even bigger smiles
Some additional updates. The price will be slightly higher (but I will keep the price the same for those who already have deposits). The reason is actually very good. I have chosen to upgrade the Wrist Pins (Gudeon Pins) with DLC coating for practically ZERO wear. The new price with DLC coated pins will be $1,670 for Pistons, DLC coated Pins and Circlips.
I am still working to get Rings at a better price. But, currently they are going to be between $200-$250 per engine set. Also, the Piston rings can be TiN plated, again for highly reduced wear. Or, I can have rings DLC coated for even greater wear reduction for a higher cost. TiN is +$80 per engine set of rings (This should add 2x to 3x the life of the rings). DLC is +$240 per engine set (but will probably NEVERwear out).
I am trying to lock in a delivery date, but they are telling me that this is the busiest time of year for them as ALL forms of racing are all trying to get their parts rush-made at the moment. I will post when I have more updates.
Mike Norman
G-Force Engine Development
www.mngforce.com
I am very sorry that I have not been active on here. I have been struggling to get a smaller-than-normal engine workload done while suffering from continued back pain. It looks like I am going in for Surgery #7 in the near future.
Now, for the good news
The Cosworth 57mm pistons were ordered in January of 2017. I ordered 48 pistons (12 engines sets) with 4 sets at the STD pin height (and 2 of those sets are already spoken for), and the rest at the HRC pin height (requiring +3.0mm longer rods). If you think you missed out on the order period, now is your FINAL CHANCE EVER to get these pistons. With what I have gone through, I will not do this again. I am doing this because, I believe with all my heart, once you twist the throttle with these pistons in your engine, your love for the awesome little V4 will be renewed with even bigger smiles
Some additional updates. The price will be slightly higher (but I will keep the price the same for those who already have deposits). The reason is actually very good. I have chosen to upgrade the Wrist Pins (Gudeon Pins) with DLC coating for practically ZERO wear. The new price with DLC coated pins will be $1,670 for Pistons, DLC coated Pins and Circlips.
I am still working to get Rings at a better price. But, currently they are going to be between $200-$250 per engine set. Also, the Piston rings can be TiN plated, again for highly reduced wear. Or, I can have rings DLC coated for even greater wear reduction for a higher cost. TiN is +$80 per engine set of rings (This should add 2x to 3x the life of the rings). DLC is +$240 per engine set (but will probably NEVERwear out).
I am trying to lock in a delivery date, but they are telling me that this is the busiest time of year for them as ALL forms of racing are all trying to get their parts rush-made at the moment. I will post when I have more updates.
Mike Norman
G-Force Engine Development
www.mngforce.com
- jpete41996
- NWAA Supporter
- Reactions:
- Posts: 91
- Joined: Tue Jan 14, 2014 3:49 pm
- Bike owned: VFR 400
- Location: Newmarket, UK
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Mike,
If I send you my rings and pins, could you have them coated???
Sent from my iPhone using Tapatalk
If I send you my rings and pins, could you have them coated???
Sent from my iPhone using Tapatalk
If i can wrench on cars, bikes should not be a problem, right?...
-
- Familiar Member
- Reactions:
- Posts: 288
- Joined: Thu May 29, 2008 5:58 am
- Bike owned: VTR-250, VFR400RR,
- Location: Santa Clara County, California, USA
- Contact:
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Yes, however the price for the pins may be slightly higher as Cosworth's price was better than what I had quoted to me.jpete41996 wrote:Mike,
If I send you my rings and pins, could you have them coated???
Sent from my iPhone using Tapatalk
What country are you in again? Maybe I can steer you to a service closer to you.
Mike Norman
G-Force Engine Development
www.mngforce.com
- jpete41996
- NWAA Supporter
- Reactions:
- Posts: 91
- Joined: Tue Jan 14, 2014 3:49 pm
- Bike owned: VFR 400
- Location: Newmarket, UK
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Germany. But I can USPS the items to you for fairly cheep. My pistons are from the first set of cosworths and I have the yahama ring set.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
If i can wrench on cars, bikes should not be a problem, right?...
- Yakama
- Site Supporter
- Reactions:
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: TAKING ORDERS: Cosworth 56mm & 57mm Pistons for 2016
Any updates Mike?