NC30 dyno 45hp :(

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
demerdzhiev
Settled in member
Posts: 62
Joined: Sun Jan 10, 2016 4:17 pm
Bike owned: NC21
Location: Bulgaria
Re: NC30 dyno 45hp :(

Post by demerdzhiev »

I am curious, did you fixed that problem? because i am in a similar situation and still cant find a solution
Top
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: NC30 dyno 45hp :(

Post by Neosophist »

demerdzhiev wrote:I am curious, did you fixed that problem? because i am in a similar situation and still cant find a solution
that low hp is likely knackered engine.. loosing compression thru worn rings / valve and not making proper power.

you will get some looses throuhg bad chain binding rear break but in the 40s and id start with a compression test.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
demerdzhiev
Settled in member
Posts: 62
Joined: Sun Jan 10, 2016 4:17 pm
Bike owned: NC21
Location: Bulgaria
Re: NC30 dyno 45hp :(

Post by demerdzhiev »

i meant the a/f problem
Top
krisztian_andre
Familiar Member
Posts: 484
Joined: Fri Oct 02, 2009 6:49 pm
Bike owned: MG v35 II, NC30, MG NF Mil.
Location: Germany
Re: NC30 dyno 45hp :(

Post by krisztian_andre »

demerdzhiev wrote:i meant the a/f problem
Nope. I am swapping the engine and will do a postmortem on the old one. Probably a combination of things. Old valve stem seals let oil in then everything got carbon deposits and now valves and rings are leaky.

You should do a compression test.
Top
Post Reply

Return to “Honda - Workshop”