Gsxr 400

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
faantjie62
Settled in member
Posts: 27
Joined: Sun Sep 20, 2015 6:35 am
Re: Gsxr 400

Post by faantjie62 »

Valves all sorted.next problem.coils getting very hot when i turn the ignition on.checked all my wires and i see nothing wrong.even the cdi was hot.theres nothing wrong with the spark.getting alot of spark but theres no pulse.constantly getting spark.
faantjie62
Settled in member
Posts: 27
Joined: Sun Sep 20, 2015 6:35 am
Re: Gsxr 400

Post by faantjie62 »

Not sure if this is the problem but i found the 2 pickup coil wires touching each other and now my new cdi is blown.think that might be the problem but now i need yet again a new cdi.
faantjie62
Settled in member
Posts: 27
Joined: Sun Sep 20, 2015 6:35 am
Re: Gsxr 400

Post by faantjie62 »

So i replaced the cdi today.stil doing the same thing.coils getting very hot.when i plug in my wires thats going to my coils into the cdi then everything is fine.when i plug in my wires from my pickup coil into the cdi with my coil wires then my coils are getting hot.please if anyone know where i can look next please tell me.
moforockband
Familiar Member
Posts: 378
Joined: Wed Jun 03, 2015 9:41 am
Bike owned: GK73a SP CRM250 mk3
Re: Gsxr 400

Post by moforockband »

what's the dc voltage getting to the cdi? measure between orange and black/white wires.
faantjie62
Settled in member
Posts: 27
Joined: Sun Sep 20, 2015 6:35 am
Re: Gsxr 400

Post by faantjie62 »

Al 3 wires giving 12v.white,black/yellow and orange.

Post Reply