NC30 Exhaust - Options?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
willwander
Settled in member
Posts: 4
Joined: Thu Apr 09, 2015 7:59 pm
NC30 Exhaust - Options?

Post by willwander »

I need a new exhaust for my NC30.
My standard system has finally rusted through at the back.

What are my options for buying a replacement?
Just eBay or are there after market ones available?

I don't know much about them, are there good ones and shit ones?
Also what's a 'half system', is this an exhaust without the header pipes, as these still seem ok.

Sorry for my ignorance and Thanks in advance.
User avatar
GeeTee
NWAA Supporter
NWAA Supporter
Posts: 141
Joined: Mon Jan 20, 2014 1:27 am
Bike owned: NC30 & GSXR750K4
Location: Dartford, Kent, United Kingdom
Re: NC30 Exhaust - Options?

Post by GeeTee »

It's a long read but there's a lot of info in this

viewtopic.php?f=23&t=6071
willwander
Settled in member
Posts: 4
Joined: Thu Apr 09, 2015 7:59 pm
Re: NC30 Exhaust - Options?

Post by willwander »

Awesome, thanks for the link.

The one that has rusted must have been on the bike since it was imported, it has more slip joints and springs than a standard system so maybe an ethos type, I'll have a good read through that thread.
Icemaestro
Familiar Member
Posts: 331
Joined: Wed Nov 27, 2013 6:45 am
Re: NC30 Exhaust - Options?

Post by Icemaestro »

Got some pictures of it? Rusted = likely mild steel, ?hrc exhaust?
willwander
Settled in member
Posts: 4
Joined: Thu Apr 09, 2015 7:59 pm
Re: NC30 Exhaust - Options?

Post by willwander »

I'll get some pictures soon.

Please don't tell me it's a HRC. :) because it's rusty and knackered, haha

end can is non-descript aluminium with a JMCA plate

Post Reply