nc30-35 linkage

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
richyrd5
Regular Member
Posts: 743
Joined: Fri Feb 21, 2014 1:31 pm
nc30-35 linkage

Post by richyrd5 »

Ive the 35 linkage on my 30,does this raise the ride height,or is it taller with the 30 one on.tia.
User avatar
bikemonkey
NWAA Supporter
NWAA Supporter
Posts: 1521
Joined: Tue Dec 27, 2011 12:33 pm
Bike owned: 92 NC30, 90 VFR750
Location: Oxfordshire
Re: nc30-35 linkage

Post by bikemonkey »

It raises the rear :peace:
richyrd5
Regular Member
Posts: 743
Joined: Fri Feb 21, 2014 1:31 pm
Re: nc30-35 linkage

Post by richyrd5 »

Thats wat i thought,but it sits pretty low,god knows wat it was like with the 30 linkage in!cheers tho chap :peace:
williamshatnerspants
Settled in member
Posts: 74
Joined: Tue Sep 17, 2013 10:51 am
Bike owned: '89 NC30
Location: Auckland, New Zealand
Re: nc30-35 linkage

Post by williamshatnerspants »

I just did mine and the ride height at the rear (measured form ground to the upper tab on the plastic coolant reservoir) went from 690mm (tired old shock and std NC30 linkage) to 720mm (rebuilt shock and shortened linkage)
richyrd5
Regular Member
Posts: 743
Joined: Fri Feb 21, 2014 1:31 pm
Re: nc30-35 linkage

Post by richyrd5 »

Wow,best i get the preload spanner out.!! :whistle:
User avatar
Cammo
Site Supporter
Site Supporter
Posts: 4505
Joined: Thu May 01, 2008 12:35 am
Bike owned: NC30
Location: Melbourne, Australia
Re: nc30-35 linkage

Post by Cammo »

Check that your eccentric hub is not upside down too, this will lower the ride height quite dramatically.
"It's just a ride" Bill Hicks

Post Reply