NC30 tacho with RVF HRC CDI
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
DAMO666
- Settled in member
- Posts: 7
- Joined: Fri Nov 23, 2012 3:26 pm
NC30 tacho with RVF HRC CDI
Considering fitting a HRC RVF CDI & loom to my NC30, is it possible to retain the NC30 tacho given the different number of pick-ups?
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: NC30 tacho with RVF HRC CDI
No mate, you need the rvf tacho also. As well as the rvf single ignition pickup, starter clutch and more.
If you're just doing it to be able to use the hrc cdi then I'd say forget it, not worth the hassle. Fitting an ignitech aftermarket ignition to the nc30 loom would be easier and cheaper.
Good info here: http://400greybike.com/forum/viewtopic.php?f=24&t=33390
If you're just doing it to be able to use the hrc cdi then I'd say forget it, not worth the hassle. Fitting an ignitech aftermarket ignition to the nc30 loom would be easier and cheaper.
Good info here: http://400greybike.com/forum/viewtopic.php?f=24&t=33390
"It's just a ride" Bill Hicks