How to fit the 600 into the 3tj
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Reactions:
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: How to fit the 600 into the 3tj
Clutch side - remove the spacers
Generator side - the engine is tight to the frame so take enough out for the new plate to fit.
Generator side - the engine is tight to the frame so take enough out for the new plate to fit.
-
- Settled in member
- Reactions:
- Posts: 7
- Joined: Mon Mar 11, 2013 5:31 pm
Re: How to fit the 600 into the 3tj
Hi all,
Today was the big day, starting the engine for the first time. I'm really happy with the result. I still have to do a lot but the beginning is there. Really thanks for the info I got on this website, especially the wiring diagram. Big hug for you guys
The movie of the first start: http://www.youtube.com/watch?v=_xTRWxvw ... 6WpMH57aew
Today was the big day, starting the engine for the first time. I'm really happy with the result. I still have to do a lot but the beginning is there. Really thanks for the info I got on this website, especially the wiring diagram. Big hug for you guys
The movie of the first start: http://www.youtube.com/watch?v=_xTRWxvw ... 6WpMH57aew
-
- Site Supporter
- Reactions:
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: How to fit the 600 into the 3tj
Sounds good and started easily too.
-
- Settled in member
- Reactions:
- Posts: 11
- Joined: Mon May 13, 2013 6:54 pm
- Bike owned: 3tjTrackbike, TRX850,YZF1000R
Re: How to fit the 600 into the 3tj
think i might be doing this to mine soon
-
- Site Supporter
- Reactions:
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: How to fit the 600 into the 3tj
Nice one - pics please and maybe a build thread too
-
- Settled in member
- Reactions:
- Posts: 11
- Joined: Mon May 13, 2013 6:54 pm
- Bike owned: 3tjTrackbike, TRX850,YZF1000R
Re: How to fit the 600 into the 3tj
i will defiantly keep you informed.
i will be picking the stuff i need up over the next week or two
oops, might of had a beer and said to much
i will be picking the stuff i need up over the next week or two
oops, might of had a beer and said to much
-
- Settled in member
- Reactions:
- Posts: 11
- Joined: Mon May 13, 2013 6:54 pm
- Bike owned: 3tjTrackbike, TRX850,YZF1000R
Re: How to fit the 600 into the 3tj
mine runs at total loss and has a BDK ignition box is the wiring simple ??
-
- Site Supporter
- Reactions:
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: How to fit the 600 into the 3tj
Depends if you want to keep the total loss system. If you get a road engine it will have an alternator so you could go for a charging system if you want to.
-
- Settled in member
- Reactions:
- Posts: 11
- Joined: Mon May 13, 2013 6:54 pm
- Bike owned: 3tjTrackbike, TRX850,YZF1000R
Re: How to fit the 600 into the 3tj
i'm thinking of keeping at total loss
-
- Site Supporter
- Reactions:
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: How to fit the 600 into the 3tj
I think the crank ends are similar so you can probably use the the BDK stuff on it