NC30 original fairings and exhaust

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
nickisokay
Settled in member
Posts: 6
Joined: Fri Jun 22, 2012 1:12 pm
NC30 original fairings and exhaust

Post by nickisokay »

Hi all,

I've got a full set of original fairings, but they are purple...

Image

They aren't in the best of condition either to be honest.

My question is - would they be worth anything..?

If not I'll attempt some DIY and give them some new paint and keep as spares.

Also I have a standard exhaust in average condition lying about, what's the going rate for these?

Thanks,
Nick
Delboy
Site Supporter
Site Supporter
Posts: 836
Joined: Mon May 11, 2009 3:25 pm
Bike owned: NC30
Re: NC30 original fairings and exhaust

Post by Delboy »

It's the old adage...it is worth what anyone is prepared to pay.
I'd be interested in the nose cone if you do decide to sell :whistle:
4 WHEELS MOVE THE BODY 2 WHEELS MOVE THE SOUL
Dynamohum
Site Supporter
Site Supporter
Posts: 780
Joined: Sun May 04, 2008 9:07 am
Location: glasgow
Re: NC30 original fairings and exhaust

Post by Dynamohum »

If the std exhaust is not cut unscuffed both heatshields undamaged then it will be sought after and will only go up in value through time.
Just noticed you have a UK spec bike if the system is the original with the supposedly freer flowing can to the jdm bikes and stamped with part number on the can of a UK bike maybe more to someone wanting the correct part for a restorer.
User avatar
VFRkieran
Site Supporter
Site Supporter
Posts: 839
Joined: Fri May 06, 2011 8:37 pm
Bike owned: NC30, NSR250, CBR600, TS125
Location: Oxfordshire
Re: NC30 original fairings and exhaust

Post by VFRkieran »

If that nosecone is a correct UK spec then it will be worth a few quid, same with the tail fairings. Shouldnt think it would be a massive amount more than Japanese spec stuff as its easily modified to look the same.

If it was me id be keeping the UK fairing and restoring the bike, looks like your missing most of the hard to find bits though.

Post Reply