92 GSF400 Bandit carbs h8 (gk73a)

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
DirtMcGirt
Settled in member
Posts: 6
Joined: Sat Mar 02, 2013 3:39 pm
Bike owned: GK73A
Location: Denver, Colorado USA
92 GSF400 Bandit carbs h8 (gk73a)

Post by DirtMcGirt »

Does anyone know if these carbs will fit a gk73a?
Top
cdegk73a
Settled in member
Posts: 16
Joined: Fri Apr 22, 2011 1:57 pm
Re: 92 GSF400 Bandit carbs h8 (gk73a)

Post by cdegk73a »

Hey again, It looks like the bandit was fitted with either BST32ss and BST33ss carbs depending on the bikes location in the world... the GK73a has BST32.. RRFK has 33mm!! RK has 32mm. The bandit manual says that BST32ss were fitted to US bandits.. model revision E-03.. and revision E-33 for California (Different pilot jet size). UK and most european Bandit 4's had the BST-33ss.. Superficially both the 32mm carbs look the same.. but as for internals, i'm guessing different jet sizes. If you buy a bank from a bandit, it's best to pull them apart and compare then to you originals.. The ID stamp is on the side of the carb body just above the float bowl..

BANDIT 400 CARB ID

ID:10D2 BST32ss (USA)
ID:10D4 BST32ss (California)
ID:10D1 BST33ss (Europe)
ID:10D3 BST33ss (Australia)
ID:10D5 BST33ss (West Germany)
Top
Post Reply

Return to “Suzuki - Workshop”