NC23 CBR900 fork conversion

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
amorti
Regular Member
Posts: 957
Joined: Sun May 18, 2008 4:51 pm
Bike owned: CB-1, MSX125
Location: Gibraltar
Re: NC23 CBR900 fork conversion

Post by amorti »

calipers 5mm spacers - you got the later yokes from a 98-99 with the alloy bottom yoke then? Would've been simpler but slightly less bling to use the pair with the earlier steel lower. The forks are placed 5 to 10mm further inboard (I forget) and a total 10mm wider on the later yokes, IDK if they had to alter the steering stops on frame or yokes to accommodate, or if this caused frame/fairing/radiator clearance issues for you?

Slightly surprised you had to swap the stems. Bearing numbers are the same I believe. Were the lengths different? It went straight in on my CB.

Look forward to your updates.
Top
Post Reply

Return to “Honda - Workshop”