NC35 Wheels
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
fatkid_loves_cake
- Settled in member
- Posts: 45
- Joined: Thu Jul 10, 2008 9:06 pm
- Bike owned: Tzr125. Nc30
- Location: Hull
Re: NC35 Wheels
I'd be interested in 2 rear wheels
-
Zippy
- Site Supporter
- Posts: 684
- Joined: Tue Mar 24, 2009 1:41 pm
- Location: South West
Re: NC35 Wheels
Pop me down for one as well please.
-
Delboy
- Site Supporter
- Posts: 836
- Joined: Mon May 11, 2009 3:25 pm
- Bike owned: NC30
-
royster81
- NWAA Supporter
- Posts: 2509
- Joined: Wed Apr 30, 2008 8:04 pm
- Bike owned: VFR400R-L NC30 CBR400RR-R NC29
- Location: Belfast,Northern Ireland
Re: NC35 Wheels
What about 3 spoke dymag lookalikes?
It's not having what you want but wanting what you've got....Loud ,Proud and Modified ....
-
slo12
- NWAA Supporter
- Posts: 102
- Joined: Sat Jun 14, 2008 1:36 pm
- Bike owned: v4's
- Location: usa
Re: NC35 Wheels
I would be in for 2, if they can drop ship to the states instead of UK.
Probably a couple others over here that would be interested as well, but shipping there then shipping here would be too many coins.
Probably a couple others over here that would be interested as well, but shipping there then shipping here would be too many coins.
being able to ride from point A to point B does not mean you have skills
-
vfrman
- Senior Member
- Posts: 1390
- Joined: Sat Apr 05, 2008 7:54 pm
- Bike owned: NC30, 1098s
- Location: Layton, Utah, USA
Re: NC35 Wheels
You could always put them in my HHG.... 
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: NC35 Wheels
Again its getting the mould thats the killer price wise so OE replicas only I'm afraidroyster81 wrote:What about 3 spoke dymag lookalikes?
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: NC35 Wheels
They would all be getting shipped to the UK in one shipment and then posted out to those who buy them, I am sure we could find a cost effective way of getting them to the USslo12 wrote:I would be in for 2, if they can drop ship to the states instead of UK.
Probably a couple others over here that would be interested as well, but shipping there then shipping here would be too many coins.
-
Kayla850
- NWAA Supporter
- Posts: 717
- Joined: Sun Apr 18, 2010 6:30 pm
- Bike owned: Sunn Tzar S2
- Location: County Durham
Re: NC35 Wheels
Yakama, you should maybe post up something like-
"I am looking into having a batch of replica RVF400 17" rear wheels made up. They will all be white/primer and will be a direct replacement for the standard RVF400 17" rear wheel. There is no scope for custom wheels or one-offs due to the costs involved. Please do not ask if you can have anything other than a copy of the standard RVF400 wheel because it is not possible unless you investigate and pay for it (the prototypes and tooling needed) yourself."
and lock this thread and start a fresh one.
Believe me (from experience!), it'll make the whole thing easier for you to handle.
As for shipping to the US, it'd pay a load of you to get together and ship a load over and redistribute them over there yourselves rather than ask someone over here to deal with multiple customs forms and couriers.
I have nothing at all to do with this by the way, but I am feeling the OP's pain right now
"I am looking into having a batch of replica RVF400 17" rear wheels made up. They will all be white/primer and will be a direct replacement for the standard RVF400 17" rear wheel. There is no scope for custom wheels or one-offs due to the costs involved. Please do not ask if you can have anything other than a copy of the standard RVF400 wheel because it is not possible unless you investigate and pay for it (the prototypes and tooling needed) yourself."
and lock this thread and start a fresh one.
Believe me (from experience!), it'll make the whole thing easier for you to handle.
As for shipping to the US, it'd pay a load of you to get together and ship a load over and redistribute them over there yourselves rather than ask someone over here to deal with multiple customs forms and couriers.
I have nothing at all to do with this by the way, but I am feeling the OP's pain right now
Useful project bike parts and stuff and things-
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
www.projection-racing.com
Titanium and Aluminium nuts & bolts-
www.pjcfasteners.com
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: NC35 Wheels
I think you may be right Kayla.
So to sum up:
The wheels will be a direct copy of the OEM wheels, so size 4.5 x 17", There is no scope for custom wheels due to new moulds needed and this would see the cost rise astronomically
They will come powder coated black as any other colour requires a higher order number
Price will be confirmed once the order has been placed
For those in other countries than the UK feel free to club together to get them shipped to your country in higher numbers to save fees
A new post will be created asking for those interested to contact me once stock is in hand
So to sum up:
The wheels will be a direct copy of the OEM wheels, so size 4.5 x 17", There is no scope for custom wheels due to new moulds needed and this would see the cost rise astronomically
They will come powder coated black as any other colour requires a higher order number
Price will be confirmed once the order has been placed
For those in other countries than the UK feel free to club together to get them shipped to your country in higher numbers to save fees
A new post will be created asking for those interested to contact me once stock is in hand