inlet restriction
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Noodles
- Settled in member
- Posts: 31
- Joined: Wed Jul 11, 2012 8:47 pm
- Bike owned: GSXR1000K3 NSR125 CBR400NC29
- Location: Nr Hull
inlet restriction
Are the inlets restricted on the nc29 type 8 models? In the model specs it mentions it.
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: inlet restriction
Yes. As long as your inlet rubbers are marked 94 (type 7&8) there is a chance that the metal restrictors are still in place. Just remove carbs and pull em out of the inlet rubbers with some pliers. But be aware that some bikes may have 33bhp restrictors in the same place.