400/600 converion no spark

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
iancullen7
Settled in member
Posts: 60
Joined: Mon Jun 01, 2009 9:30 pm
Bike owned: fzr400 88 fzr600 92
Location: liverpool
400/600 converion no spark

Post by iancullen7 »

HI not getting spark off either coil pack any ideas? tried 3he coil pack just plugged in with spark plug in touching frame, still no spark :( 99%done
Top
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: 400/600 converion no spark

Post by Evilchicken0 »

Have you plugged in the generator ??? The pickup is under the gennycasing and it senses the flywheel, if that's not plugged in then there's no signal to the cdi.
Top
iancullen7
Settled in member
Posts: 60
Joined: Mon Jun 01, 2009 9:30 pm
Bike owned: fzr400 88 fzr600 92
Location: liverpool
Re: 400/600 converion no spark

Post by iancullen7 »

all connectors seem to be plugged in got no loose ends, me thinks i need a friend with a volt meter :x
Top
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: 400/600 converion no spark

Post by Evilchicken0 »

Check the pickup in the genny housing.
Top
iancullen7
Settled in member
Posts: 60
Joined: Mon Jun 01, 2009 9:30 pm
Bike owned: fzr400 88 fzr600 92
Location: liverpool
Re: 400/600 converion no spark

Post by iancullen7 »

just put in the 400 cdi unit hey presto she lives
Top
Post Reply

Return to “Yamaha - Workshop”