HRC map ignitech

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
porndoguk
Site Supporter
Site Supporter
Posts: 3293
Joined: Wed Jun 16, 2010 11:17 pm
Bike owned: NC30
Location: Middle England
Contact:
Contact porndoguk
Re: HRC map ignitech

Post by porndoguk »

mo haggs wrote:
RickOliver wrote:Update -

With help from a couple of fellow 400gb members we have arrived at the solution to the missing top end power issue with Ignitech ignition units.

I`ll put up a new thread with a full explanation over the weekend and also get an emailable package together containing a DIY fix for anyone who needs it...

Rick
Does this apply to both 30 + 35?
This only applies to the v80 versions but the CDIs are all the same minus the lead and map/advance.

So i would imagine its a firmware upgrade so would solve both problems i hope.

Rick
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details

http://www.bikerstraining.com

Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
Top
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: HRC map ignitech

Post by Drunkn Munky »

The 30 and 35 ignitech CDI's are different units, swapping the looms doesnt work, been there tried that. Although essentially run the same software so theres a good chance the upgrade should cover both.

Well done rick for sorting this and PD for being a persistant NC geek and doing the tests to finally put this to rest, look forward to the results.
Top
User avatar
porndoguk
Site Supporter
Site Supporter
Posts: 3293
Joined: Wed Jun 16, 2010 11:17 pm
Bike owned: NC30
Location: Middle England
Contact:
Contact porndoguk
Re: HRC map ignitech

Post by porndoguk »

Drunkn Munky wrote:The 30 and 35 ignitech CDI's are different units, swapping the looms doesnt work, been there tried that. Although essentially run the same software so theres a good chance the upgrade should cover both.

Well done rick for sorting this and PD for being a persistant NC geek and doing the tests to finally put this to rest, look forward to the results.
:ugeek:
NC30 & NC23 33BHP Restrictors For Sale
£25 Inc P&P and donation to 400GB PM for more details

http://www.bikerstraining.com

Like us on Facebook for more information - First Bike on Scene - Emergency Response Skills - UK
Top
slowsport
Settled in member
Posts: 100
Joined: Thu Sep 23, 2010 12:44 am
Bike owned: NC35
Location: London
Re: HRC map ignitech

Post by slowsport »

Drunkn Munky wrote:Well done rick for sorting this and PD for being a persistant NC geek and doing the tests to finally put this to rest, look forward to the results.
:plus:
Top
lukemillar
Site Supporter
Site Supporter
Posts: 690
Joined: Thu Aug 26, 2010 11:43 pm
Bike owned: '89 NC30 Racebike #24
Location: Wellington, New Zealand
Re: HRC map ignitech

Post by lukemillar »

Looking forward to seeing the fix as well

Big thanks to Rick and the other 400greybike folk for diagnosing/fixing this!
Top
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7161
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: HRC map ignitech

Post by CMSMJ1 »

Nice work guys - looking forwards to seeing how it works
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
Top
User avatar
RickOliver
Site Supporter
Site Supporter
Posts: 492
Joined: Sun May 11, 2008 8:55 am
Re: HRC map ignitech

Post by RickOliver »

This will correct the problem with NC30 and NC35 TCIP4 V80 units which is due to a simple error in the original Ignitech factory setup - despite urban myth/popular rumour, it`s an issue which doesn`t affect the V75 units...

Rick
Top
User avatar
alexwitham
Site Supporter
Site Supporter
Posts: 1340
Joined: Wed May 20, 2009 10:04 pm
Bike owned: 675R, GSXR6, NC30
Location: Norwich
Re: HRC map ignitech

Post by alexwitham »

How do I check if mines the V75 or V80 unit.
Top
User avatar
RickOliver
Site Supporter
Site Supporter
Posts: 492
Joined: Sun May 11, 2008 8:55 am
Re: HRC map ignitech

Post by RickOliver »

Given that you only live 2 villages away, Alex it`s probably simplest if you drop it round to my house - I`ll check it for you and update if necessary...

Rick
Top
User avatar
alexwitham
Site Supporter
Site Supporter
Posts: 1340
Joined: Wed May 20, 2009 10:04 pm
Bike owned: 675R, GSXR6, NC30
Location: Norwich
Re: HRC map ignitech

Post by alexwitham »

Diamond.

I'll bring it over sometime. Thanks Rick
Top
Post Reply

Return to “Honda - Workshop”