660 stroker rods
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 212
- Joined: Wed Jul 23, 2008 3:33 pm
- Location: Rainham, Kent.
Re: 660 stroker rods
That's a very good question, especially as I have just taken delivery of a fazer crank and rods!nynoah wrote:The other thing I was hoping to figure out was if the profile of the fazer flywheel was the same as the FZR 3HE. Because it looks like the same pickup points as the YZF600r.
I think that EC0 has all three cranks in his possession, can you get the measuring stick out Boris?!?
Alex.
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: 660 stroker rods

4JH
FZS
3HE
I think the 3HE is narrower although the picture makes it look the same - I'll be at college tomorrow evening and give it a proper measure then. I'll try and get the 4JH stator off but I think there's a difference it's in the FZR Archives tread.
How many sets of rods do you need ? have a look and find out the cost / weight to ship and I can maybe calc the optimum no of sets ...

-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: 660 stroker rods
And another thing
The Fazer's red line is 12.5k rpm on the clocks
The 4JH is 13k
The 3HE is 11.5k
The rev ceiling isn't down to the Fazer rods

The Fazer's red line is 12.5k rpm on the clocks
The 4JH is 13k
The 3HE is 11.5k
The rev ceiling isn't down to the Fazer rods