For the F3-TT nerds among us.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: For the F3-TT nerds among us.
Yep.. thats building the bike to HRC Kit spec, the factory made HRC bikes (which wern't from kit) often have other trick stuff done to them that isn't in the kit manuals like fancy frame work and billet parts so while the power may be the same the factory bikes are probably faster.Yakama wrote:HRC manual says 78PS I think (77BHP)
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Re: For the F3-TT nerds among us.
Isn't PS the same as HP? I thought PS was German and short for pferdstaercke which literally translates as"horse strength or power"Yakama wrote:HRC manual says 78PS I think (77BHP)
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: For the F3-TT nerds among us.
No they are slightly different (But not by much 1 HP = 1.014 PS)
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Re: For the F3-TT nerds among us.
Good to know!Yakama wrote:No they are slightly different (But not by much 1 HP = 1.014 PS)
-
lukemillar
- Site Supporter
- Posts: 690
- Joined: Thu Aug 26, 2010 11:43 pm
- Bike owned: '89 NC30 Racebike #24
- Location: Wellington, New Zealand
Re: For the F3-TT nerds among us.
Have you had yours on the dyno yet??montsta56 wrote:what sort of power would a full f3 30 put out???
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: For the F3-TT nerds among us.
Here is some more RVF400 & RCB400 pics I found recently:
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: For the F3-TT nerds among us.
Just got the jap article that has the RVF400 TTF3 in it along with a pic of an F3 NC30. If anyone wants high res copies of these PM me and I will email them over:
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: For the F3-TT nerds among us.
Superb mate, you have my email 
-
Yakama
- Site Supporter
- Posts: 1369
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: For the F3-TT nerds among us.
email sent let me know if they donr arrive as they are quite big files
-
Drunkn Munky
- Site Supporter
- Posts: 6313
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: For the F3-TT nerds among us.
Recieved cheers mate. So 3rd pic down, at the top is the TT-F3 RVF with the swingarm setup the same as our NC's yet the bottom naked pics show the bike with the swingarm reversed like a RS250, whats that about?