Swingarm & frame measurment
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
rdstars
- Settled in member
- Posts: 28
- Joined: Wed Sep 10, 2008 7:10 pm
Re: Swingarm & frame measurment
Thanks druid.fastdruid wrote:Yeah, sorry I've not got back home while light since saying I'd do it, I'll measure it as soon as I get home tonight.
Druid
-
fastdruid
- Regular Member
- Posts: 893
- Joined: Wed Apr 30, 2008 7:39 pm
Re: Swingarm & frame measurment
222mm measured between the machined flat on the left and right sides of the frame.
Again only with a tape measure so may be a few mm out.
Druid
Again only with a tape measure so may be a few mm out.
Druid
-
rdstars
- Settled in member
- Posts: 28
- Joined: Wed Sep 10, 2008 7:10 pm
Re: Swingarm & frame measurment
Kool, thats close enough, should get my measurements alot closer for the RD project.fastdruid wrote:222mm measured between the machined flat on the left and right sides of the frame.
Again only with a tape measure so may be a few mm out.
Druid
Thanks Druid
-
duh_ave
- Settled in member
- Posts: 42
- Joined: Tue May 06, 2008 12:00 am
Re: Swingarm & frame measurment
rdstars wrote:Just wondering if someone can take a measurement for me please.
I need the distance between the chassis/frame where the swingarm fit's in.
Thanks
you dont happen to named Scott do you?