Air box Manifolds ...

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
petrolhead
Settled in member
Posts: 68
Joined: Sun Nov 06, 2011 11:28 am
Air box Manifolds ...

Post by petrolhead »

Right the Manifolds from the airbox thhat sit on top of the carbs are knackered ,,,3TJ ... The ones like a snorckle ..
They have gone completely hard and are a bitch to get on...
I did put in water and fit but when they go firm they keep popping off again..
So where can I get new one's or is that asking for a miracle ..
Thought I had some sourced but no Joy..
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: Air box Manifolds ...

Post by Evilchicken0 »

New ones from Fowlers (or maybe your Yamaha dealer) they need a frame number before they'll serve you because it's a jap import.
Or maybe have a look for an airbox on das bay, it will probably come with the rubbers but check the picture
User avatar
Tonyj
Site Supporter
Site Supporter
Posts: 136
Joined: Thu Sep 01, 2011 7:53 pm
Bike owned: FZR400 3EN1 88, YZFR125.GK76a
Location: Northumberland
Re: Air box Manifolds ...

Post by Tonyj »

Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: Air box Manifolds ...

Post by Evilchicken0 »

Nope, those are beteen the carbs and enginge and they're for a 1987 2TK
User avatar
Tonyj
Site Supporter
Site Supporter
Posts: 136
Joined: Thu Sep 01, 2011 7:53 pm
Bike owned: FZR400 3EN1 88, YZFR125.GK76a
Location: Northumberland
Re: Air box Manifolds ...

Post by Tonyj »

Hi Evil ah i see didnt realise they were different.
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: Air box Manifolds ...

Post by Evilchicken0 »

;)

Post Reply