Number 9 - What was and what shall be

[Variablevalves suck]

We have the power!
Even got plastigauge, dial gauge, etc ready to go.

[CMSMJ1]

Well then Squire - I think I might take you up on your generous offer and once Ihave my shit in order I would be glad of some asistsance as it is the plastigauge parts of stuff that confuse me..lol

Will let you know some possible timings - depends if I can pull ym finger out my arse adn get up to the garage for enough time to get started!

[CMSMJ1]

Well..ZOMBIE

As I have not had anything other than zero motivation to sort this motor out..and the knackered one is still in the frame..err..there is not a huge amount to report.

Apart from the fact that I collected a cheap motor yesterday and will be cleaning it and seeing if it works. I've had nasty man flu (is there any other kind) this last week and so no movement.

I will try to make some sensible pics and updates - Am going to refresh my forks, lap some valves, dremel some flashing, swap out and back in my GSXR genny and pukka clutch. If I am feeling the uver skills...then a drilling of the oil cooler blanks might well take effect and I'll try to fit an NC24 oil pump and see if I can get that working.

This all in the next "while".... I am happy about it though, if this engine doesn;t work, I'll pay the proper fee and get one I know works from a man I trust, Geoff.

Bring on the rebirth....

[porndoguk]

Well..ZOMBIE

As I have not had anything other than zero motivation to sort this motor out..and the knackered one is still in the frame..err..there is not a huge amount to report.

Apart from the fact that I collected a cheap motor yesterday and will be cleaning it and seeing if it works. I've had nasty man flu (is there any other kind) this last week and so no movement.

I will try to make some sensible pics and updates - Am going to refresh my forks, lap some valves, dremel some flashing, swap out and back in my GSXR genny and pukka clutch. If I am feeling the uver skills...then a drilling of the oil cooler blanks might well take effect and I'll try to fit an NC24 oil pump and see if I can get that working.

This all in the next "while".... I am happy about it though, if this engine doesn;t work, I'll pay the proper fee and get one I know works from a man I trust, Geoff.

Bring on the rebirth....

[nastro400]

this trackday was the best and i have some onboard footage from it. i have sold my vfr now but looking to get another one soon.

[CMSMJ1]

Word up..
well, it has taken me a while to be arsed sorting this out.

Bike looked like this at lunchtime today





Had the pooch giving me a paw and some company in the garage



Where the magic happens..



Now sorted..no motor



I am a cheesy cheese merchant, I know that much



This is the donor - it was cheap. I have no idea whether it works




So, the plan is to fit that motor tomorrow and get it running if at all possible. If it works..then I'l run it for a month or so and make sure we have a working motor.

In the meantime, I will build up the spare chassis I have and send the V5 off for the frame/reg swap. Once that is ready then we'll be looking at another bit of ramp time and get the motor swapping technique sorted.

I've enjoyed working on my bike today, it is fecking tiny. You do forget how small NC30s actually are and how bloody marvellous they are all told.

Rock on No9...hope to be riding it

[tanuki]

Fuckimg yay mate.

Glad to see you back on it.

[reverse cylinder jim]

Nice one mate, fingers crossed the motor is sweet.
Is that a Husky i spy in the background?
James

[porndoguk]

Whats that white thing? Is that a fuel injected turbo charger,

Glad you got thd bug back

NC's Rock Fuck Yeah!

[Variablevalves suck]

Thats a genuine HRC airbox dont ya know!