NC29 Paddock Stand
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Seoul City
- Settled in member
- Posts: 18
- Joined: Wed Jul 02, 2008 3:34 am
NC29 Paddock Stand
Bit of advice, please. I've got a Scorpion rear paddock stand, which is not really ideal, and I wouldn't have bought it had I known that the hooks don't fit NC29 bobbins (the offside one fouls the silencer, and even one of the cups had to be modified in order to get any use at all out of the stand). I now need a front stand and don't want to make the same mistake. Any recommendations, please, as to the best value front stand for an NC29? Cheers.
-
leopard_pagan
- Senior Member
- Posts: 1184
- Joined: Thu May 01, 2008 6:42 am
- Bike owned: CBR400/600 Fighter
- Location: Mildenhall-Suffolk
- Contact:
Re: NC29 Paddock Stand
i have a bog standard red rear stand.. it always fouls the bottom of the end can.... because my end can is oval...if it was round it would be ok!
i have to pop a block of wood into the cup on that side. if i used hooks id never get the stand on!
i have to pop a block of wood into the cup on that side. if i used hooks id never get the stand on!
-
BrownyNC29
- Settled in member
- Posts: 46
- Joined: Thu May 08, 2008 9:30 am
Re: NC29 Paddock Stand
I have an NC29 and had the same problem before I changed my end can, anyway your best getting an Abba stand they are £100 but with a block of wood it keeps both wheels off the ground and you can strip the whole bike forks off rear shock out etc etc so its a worthwhile investment for the future :-)