Carburettor Hoses (and balancing)

H D · Post by **H D** » Fri Dec 09, 2011 10:56 pm

Okay, there are so many different connections for the different hoses to go to and the manual is just confusing me!

I take it the main fuel hose goes to the bottom at the back in the middle.

What about the other hoses?!

And the vacuum hose goes to the little connection of the inlet of carb no. 1, right?

Also, when balancing the carbs, which screws do you turn? Is it the screws between each carbs on the throttle return springs?

Pictures may help guys

Thanks!

Post by **Variablevalves suck** » Wed Dec 14, 2011 1:21 pm

you are correct with the hoses, top hose on the carbs is an air vent for the bowls and just sits open ended.

Capey · Post by **Capey** » Fri Jun 15, 2012 10:45 pm

I'm also wondering where the carb breather pipe goes. If it's open ended, where is the open end usually routed to?

H D · Post by **H D** » Mon Jun 18, 2012 11:11 am

Either straight out the bottom of the pipe or connected to the coolant breather with a y-piece then that has a hose connected hanging out of the bottom of the bike.

Carburettor Hoses (and balancing)

Carburettor Hoses (and balancing)

Re: Carburettor Hoses (and balancing)

Re: Carburettor Hoses (and balancing)

Re: Carburettor Hoses (and balancing)