t/cat starter gear/motor compatability

[scooby4/6]

can anyone shed any light on the different engines/model/yrs that are compatible with the t/cat engine rearding the above?

starter gears+clutch
starter motor
gear selector shaft

cheers

[Hogdigerdy Dog]

not sure but the t-cat manual is here

http://www.mediafire.com/?9gkrdi7pi7ikm

might shed some light

[Evilchicken0]

I think the T'cat motor is the Foxeye with slightly higher compression and a stronger crank to cope with it.

[bullitt118]

I think the T'cat motor is the Foxeye with slightly higher compression and a stronger crank to cope with it.

The T'cat is 62 × 49.6 mm bore x stroke with nikasil liners
The Foxeye is 59.0 x 54.8 mm steel liners..

Foxeye starter gears etc should be the same..

[hunter]

I think the T'cat motor is the Foxeye with slightly higher compression and a stronger crank to cope with it.

The T'cat is 62 × 49.6 mm bore x stroke with nikasil liners
The Foxeye is 59.0 x 54.8 mm steel liners..

Foxeye starter gears etc should be the same..

Sorry,don't know where you got that information but it's wrong.
FZR600 3HE 59.00 x 54.8 mm steel liners. comp 12.0;1
foxeye 4jh 62.00 x 49.6 mm. comp 12.01
Thundercat 62.00 x 49.6 mm. comp 12.0;1
I also believe the foxeye and thundercat are steel liners.
The thundercat has stronger rods.
But having siad all that i think the starter motors are compatable.

[scooby4/6]

thanks for the replies/info,got the starter gears+clutch now,just on with the selector shaft+motor.

will be speaking to my engine guru next week,so will ask him to confirm the above (for anyone else who might need to know)