FZR 400 Front Brakes Severely Binding?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
MarkT
Familiar Member
Posts: 384
Joined: Thu Aug 11, 2011 6:52 pm
Re: FZR 400 Front Brakes Severely Binding?

Post by MarkT »

Yes of course, hope it all goes together ok!!
User avatar
Hogdigerdy Dog
Site Supporter
Site Supporter
Posts: 545
Joined: Mon Sep 14, 2009 6:34 pm
Bike owned: FZR400RR 3TJ, ZX9R fighter
Location: Dorsetshire
Re: FZR 400 Front Brakes Severely Binding?

Post by Hogdigerdy Dog »

Evilchicken0 wrote:It's the piston sizes and therefore the seals that are common not necessarily the calipers.
spot on ec
most of the bikes mentioned that this seals kit fits have blue spots,
which is what made me check just to make sure, and as for as i can see their all the same as the tj
User avatar
Hogdigerdy Dog
Site Supporter
Site Supporter
Posts: 545
Joined: Mon Sep 14, 2009 6:34 pm
Bike owned: FZR400RR 3TJ, ZX9R fighter
Location: Dorsetshire
Re: FZR 400 Front Brakes Severely Binding?

Post by Hogdigerdy Dog »

and the wemoto saga continues
what a croc of shit these peeps are

email 1

could you please confirm postage as the items have not arrived yet
your dispatch note says they were posted on the 10-11-11 (see below) so i should have received them by now
regards mr steve
From: Wemoto Order Processing <shipping@wemoto.com>
To: hogdigerdy
Sent: Thursday, 10 November 2011, 12:45
Subject: Wemoto Order #86488037 Dispatched

Dear Steve

The following items from your order have been dispatched.

Rebuild Kit Full Seals Caliper - Front - Caliper Seals Only O.D 30mm as fitted to Yamaha x 4
Rebuild Kit Full Seals Caliper - Front - Caliper Piston Seal and Dust Seal ID 27mm x 4
Rebuild Kit Full Seals Caliper - Front - Bleed Nipple Cover Black x 2
Rebuild Kit Full Seals Caliper - Front - P_euro Blister Pack for Caliper Seal kit with label x 1
Rebuild Kit Full Seals Caliper - Front - Brake Grease RED For Brake Caliper Rebuilds Small Tub average content 2 grams x 1
Rebuild Kit Full Seals Caliper - Front - Sticker for Caliper kits x 1

Please send any questions regarding shipping of your order to shipping@wemoto.com.

email 2 - 12 days later and after delivery of a completely different seal kit

hi
iv'e received the seal kit, many thanks
can you confirm that this seal kit fit's the fzr 400 rr 3tj as this is the kit i originally ordered
i'm pretty sure the pistons are the same sizes for both, 30mm and 27mm
regards
steve
From: Wemoto Order Processing <shipping@wemoto.com>
To: hogdigerdy
Sent: Tuesday, 22 November 2011, 11:45
Subject: Wemoto Order #88846420 Dispatched

Dear Mr Steve

The following items from your order have been dispatched.

Front Brake Caliper Seal Kit Yamaha FZS600 FZS1000 Fazer TDM900 YZF R1 BT1100 Bulldog FJR1300 - Caliper Seals Only O.D 30mm as fitted to Yamaha x 4
Front Brake Caliper Seal Kit Yamaha FZS600 FZS1000 Fazer TDM900 YZF R1 BT1100 Bulldog FJR1300 - Caliper Piston Seal and Dust Seal ID 27mm x 4
Front Brake Caliper Seal Kit Yamaha FZS600 FZS1000 Fazer TDM900 YZF R1 BT1100 Bulldog FJR1300 - Bleed Nipple Cover Black x 2
Front Brake Caliper Seal Kit Yamaha FZS600 FZS1000 Fazer TDM900 YZF R1 BT1100 Bulldog FJR1300 - P_euro Blister Pack for Caliper Seal kit with label x 1
Front Brake Caliper Seal Kit Yamaha FZS600 FZS1000 Fazer TDM900 YZF R1 BT1100 Bulldog FJR1300 - Brake Grease RED For Brake Caliper Rebuilds Small Tub average content 2 grams x 1
Front Brake Caliper Seal Kit Yamaha FZS600 FZS1000 Fazer TDM900 YZF R1 BT1100 Bulldog FJR1300 - Sticker for Caliper kits x 1

Please send any questions regarding shipping of your order to shipping@wemoto.com.

email 3

hi wemoto
i know you don't have the FZR 400 RR 3tj seal kit listed anymore, but you did when i ordered and paid for them over 2 weeks ago ! and they never turned up.
you have sent another set which i would assume should fit otherwise why send them
please confirm
regards
steve

From: Wemoto <rob@wemoto.com>
To: Steve
Sent: Thursday, 24 November 2011, 15:43
Subject: Wemoto Order 88846420

Dear Mr Hogdigerdy,
Thank you for your order.
We cannot confirm that the kit you have received will fit the FZR400 as we do
not have the front brake seals listed.
--
Regards
The Wemoto Team.

what a load of bollocks
looks like they sold me something they aint got, as the listing was taken down the next day,
then kept me waiting for 2 weeks before sending me something they can't guarantee will work as it's not for my bike rather than just giving me a refund
does anyone know if these will actually fit
cos once i strip the calipers down i'm effectively off the road till i get another set if they don't
MarkT
Familiar Member
Posts: 384
Joined: Thu Aug 11, 2011 6:52 pm
Re: FZR 400 Front Brakes Severely Binding?

Post by MarkT »

What dickheads!! Not a place I am ever going to buy from. You know I don't know if they will fit or not but at least if need be you have 7 days for a refund due to distance selling regulations.
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: FZR 400 Front Brakes Severely Binding?

Post by Evilchicken0 »

Why didn't you just ring them up ???
User avatar
Hogdigerdy Dog
Site Supporter
Site Supporter
Posts: 545
Joined: Mon Sep 14, 2009 6:34 pm
Bike owned: FZR400RR 3TJ, ZX9R fighter
Location: Dorsetshire
Re: FZR 400 Front Brakes Severely Binding?

Post by Hogdigerdy Dog »

Evilchicken0 wrote:Why didn't you just ring them up ???
i did ring them up between the first 2 emails and this was when they said they would send another seal kit to replace the one that never turned up, only they sent the wrong ones and are now trying to pass the buck to me

"Thank you for your order.
We cannot confirm that the kit you have received will fit the FZR400 as we do
not have the front brake seals listed"
like it's my fault

and they did have them listed when i ordered and paid for them

AND it get's better
just phoned em up again and they don't have the fzr400 seal kit and no, the one they sent won't fit
then i pointed out they still have the separate seals (27 & 30mm) listed so put 4 dust and oil seal for each size in a pack and that's a kit simples
do we he said well they wont fit either and should have been taken down as well, send em back and we'll give a refund
so after over 2 weeks of fannying about i still don't have a seal kit and anyone who has ordered some in that time also has the wrong ones
the worst bit is they know they won't fit but have done nothing to alert their customers to this balls up
MarkT
Familiar Member
Posts: 384
Joined: Thu Aug 11, 2011 6:52 pm
Re: FZR 400 Front Brakes Severely Binding?

Post by MarkT »

Nightmare!!
User avatar
Hogdigerdy Dog
Site Supporter
Site Supporter
Posts: 545
Joined: Mon Sep 14, 2009 6:34 pm
Bike owned: FZR400RR 3TJ, ZX9R fighter
Location: Dorsetshire
Re: FZR 400 Front Brakes Severely Binding?

Post by Hogdigerdy Dog »

sorry for the post highjack woody :oops:

if you ordered those seals from wemoto double check you got the right ones as their still advertising fzr400 rr seals but sending out the 600/1000 kits even though i was assured the listing will be taken down, if you buy the single seals their the same and won't fit either
the pistons are the same size diameter but the width of the seal is bigger so they'll not fit in the groove properly

hope your getting further than i am ;)
User avatar
Hogdigerdy Dog
Site Supporter
Site Supporter
Posts: 545
Joined: Mon Sep 14, 2009 6:34 pm
Bike owned: FZR400RR 3TJ, ZX9R fighter
Location: Dorsetshire
Re: FZR 400 Front Brakes Severely Binding?

Post by Hogdigerdy Dog »

so the plot thickens

sent the seal kit back last sat as the numty i spoke to at wemoto on the phone said they wont fit and a refund will be given and they'll take down the listing as it's wrong
OK thinks i all i need now is to find someone else who does em

well tuesday i get a phone call from the main man at wemoto, (ramone i think that's how you spell it)
"why you send the seal kit back what wrong" (he's foreign but makes more sense than the English bloke)
after 10 mins of explaining what had happend, he checked out my order on his computer and said there is a note here that says they don't fit but i don't understand as i'm looking at the phish and there the same part numbers so they should fit

anyway, the upshot of which is i got the seal kit back again yesterday with instructions to see if it fit's and let em know, if not keep em and we'll find something else for you or give you a refund, bloody descent chap :o

so tomorrow we'll see if they fit and if they do i'll let him know and they can re-list the 400 seal kit
MarkT
Familiar Member
Posts: 384
Joined: Thu Aug 11, 2011 6:52 pm
Re: FZR 400 Front Brakes Severely Binding?

Post by MarkT »

Fingers crossed!
Regards
Mark

Post Reply