Jacked rear 3EN1 now stand too short- Ideas?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
Tonyj
Site Supporter
Site Supporter
Posts: 136
Joined: Thu Sep 01, 2011 7:53 pm
Bike owned: FZR400 3EN1 88, YZFR125.GK76a
Location: Northumberland
Jacked rear 3EN1 now stand too short- Ideas?

Post by Tonyj »

First of all, thanks Kayla for the jack up kit it looks much better and feels right for my lanky 6ft 2 frame :grin:

Problem I have now is when off the paddock stands and on the original stand the bike leans on an angle which is right over, I wouldnt feel comfortable leaving it. Any ideas on which sidestands are about an inch longer and should fit?

cheers Tony
barryfzr
Site Supporter
Site Supporter
Posts: 144
Joined: Wed Apr 30, 2008 11:12 pm
Re: Jacked rear 3EN1 now stand too short- Ideas?

Post by barryfzr »

Try an fzr600 3he... I had the wrong one on my Genesis and it was a tad to upright for my liking. It might be knocking around if you measure yours. ;)
User avatar
Tonyj
Site Supporter
Site Supporter
Posts: 136
Joined: Thu Sep 01, 2011 7:53 pm
Bike owned: FZR400 3EN1 88, YZFR125.GK76a
Location: Northumberland
Re: Jacked rear 3EN1 now stand too short- Ideas?

Post by Tonyj »

Hi Barry mate, ill measure the stand at work tomorrow as the bikes stored there , Kayla thought an R1 stand might fit but if theres a cheep 600he stand goin spare here then ill go for that.. :grin:
Ill pm you tomorrow if thats ok?

Cheers
barryfzr
Site Supporter
Site Supporter
Posts: 144
Joined: Wed Apr 30, 2008 11:12 pm
Re: Jacked rear 3EN1 now stand too short- Ideas?

Post by barryfzr »

Yep no problem.. but no promises as my spares are spread all over. I'll do my best for you though ;) I know I swopped one round but finding it is a whole new ball game ;)
Evilchicken0
Site Supporter
Site Supporter
Posts: 5374
Joined: Tue Apr 29, 2008 8:59 pm
Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
Location: Lundin Taan
Re: Jacked rear 3EN1 now stand too short- Ideas?

Post by Evilchicken0 »

You'll need the return springs as well ;)
User avatar
Kayla850
NWAA Supporter
NWAA Supporter
Posts: 717
Joined: Sun Apr 18, 2010 6:30 pm
Bike owned: Sunn Tzar S2
Location: County Durham
Re: Jacked rear 3EN1 now stand too short- Ideas?

Post by Kayla850 »

Righty dokey, the TRX sidestand is 250mm, from the tip of the foot to the centre of the pivot, and the R1 sidestand is 15mm longer. I hope this helps!
Useful project bike parts and stuff and things-

www.projection-racing.com

Titanium and Aluminium nuts & bolts-

www.pjcfasteners.com
User avatar
Tonyj
Site Supporter
Site Supporter
Posts: 136
Joined: Thu Sep 01, 2011 7:53 pm
Bike owned: FZR400 3EN1 88, YZFR125.GK76a
Location: Northumberland
Re: Jacked rear 3EN1 now stand too short- Ideas?

Post by Tonyj »

Hi all, and thanks for that info Kayla, i too measured mine from the centre of the pivot and it was 230mm and Im thinking that ive probably gained about 35mm in height with the jack up kit. :grin:

So I should need another 30-35 mm extra in the stand? This means that the R1 stand will probably be the best bet from Kayla's measurements.

Or Barryfzr would your Fzr600 stand be anywhere near 265mm by any chance? ;)

cheers again for all your help guys n gal
User avatar
Hogdigerdy Dog
Site Supporter
Site Supporter
Posts: 545
Joined: Mon Sep 14, 2009 6:34 pm
Bike owned: FZR400RR 3TJ, ZX9R fighter
Location: Dorsetshire
Re: Jacked rear 3EN1 now stand too short- Ideas?

Post by Hogdigerdy Dog »

just as a side note ;)
have you taken into account that if the stand is longer (30-35mm) your going to have to fit some kind of bung to it to step it down from the swing arm or the chain will grind the bugger in 1/2
you'd probably be alright with a well adjusted chain but they don't stay well adjusted and don't forget there's more slack at the bottom under power than stationery
User avatar
Tonyj
Site Supporter
Site Supporter
Posts: 136
Joined: Thu Sep 01, 2011 7:53 pm
Bike owned: FZR400 3EN1 88, YZFR125.GK76a
Location: Northumberland
Re: Jacked rear 3EN1 now stand too short- Ideas?

Post by Tonyj »

Hogdigerdy Dog I'd not considered that tbh, thanks for the advice, i def need to bear that in mind.

cheers

Tonyj

Post Reply