Gk76a dyno ect
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
morris147
- NWAA Supporter
- Posts: 248
- Joined: Sat Apr 25, 2009 11:08 pm
Gk76a dyno ect
So whats the standard jetting for a gk76a?
What jetting would you recommend for a tuned gk76a with full system and k&n (big ring)?
Dyno center dont want to touch mine without a base setting...
What jetting would you recommend for a tuned gk76a with full system and k&n (big ring)?
Dyno center dont want to touch mine without a base setting...
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: Gk76a dyno ect
Is the bike running? im surprised they wont run it as the dyno will show the fueling straight off and you can alter the jetting from the findings.
If it runs and revs clean at the moment it will be close, the last bike i worked on that had a k&n needed the needle lifting one place but did not run any more air at the top end so main jet was as stock.
If it runs and revs clean at the moment it will be close, the last bike i worked on that had a k&n needed the needle lifting one place but did not run any more air at the top end so main jet was as stock.