Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Nothing more to say really, if it's been organised it'll be here.
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7160
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by CMSMJ1 »

now then Chris.. I have a set of inters going spare... and you need to come collect that wheel anyways.

Get something booked!
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
User avatar
Variablevalves suck
Site Supporter
Site Supporter
Posts: 1922
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by Variablevalves suck »

OK ive booked up but should have done it yesterday as the inters was full again today. I will be in with the slow joe's but my B4 aint no race bike so at least i can over take a few people.
Not going to ride over, i will stick it on the trailer and camp over sunday. :peace:
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7160
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by CMSMJ1 »

After a drive through torrential rain on Sunday and a drizzling ballache of tent erection the 400GB pico meet was on.

Met Geoff and his lovely wife at the track, in the rain and grim winds of depest darkest lincolnshire! Tent sorted and Chris rolled up with his uber bandit.

We rolled to Louth to get some mucky pizza and chips and a few nelsons. Slept the sleep of the uncomfortable, full bellied insomniac and woke at 0500 to rearrange my hit and get another hour in!

We were briefed and sorted, moto all fettled and ready to roll and with a light drizzle being replaced by sunshine we were ready to get wicked.

First session was slow and chilling out and so not a lot to report. Noticed a slooooooooow dude on a zx6r and he was fucking annoying..wind it on!!

Second and 3rd sessions were getting better and I also got some timing sorted with race chrono (I'll post some piccies in a bizzle) I had a previous PB of 1m52 in a race at Cadwell and I wanted to get a 1m55 sorted for today.
3rd session, 1m55 flat! w00t.

It was a session of carnage though as we had a 954 blade highsided on the entrance to Park straight (Charlies 2) which was messy..and on the very last lap of that session a dude on a new Gixxxahhh decided to fuck it up and highside out of Mansfield. As I rode past he was immobile, out of shame and regret, whereas his once shiny bike is going to be written off as it was banana'd.

Reversecyl Jim, swooping about with Spike Edwards (is he on here? "bloke") had the blade carnage on film.

This was 2nd session..and so the 3rd session saw cement dust down at the Hairpin, the end of Park straight and Park corner, the exit of the Gooseneck and also a long dribble round Mansfield and the chicance to stop just after it. Dickhead people with oil coming out the bike and falling off a lot ..not a good start.

Lunch was burgers (thanks Charlie)and bananas and some kikcing back in the sun.

4th session was a total ballache. due to the shite zx6 man, there were rolling road blocks of dumb tossers that should learn to ride there wannabe racebikes. I was catching the train up and decided to slow right down, let them go away and I'll then get some free track. I dawdled for 2 laps...and upon picking my pace up it only took me half a lap to catch this slow and dangerous, frustrating pain in the nuts up. Just annoyed me (can you tell?)
Didn;t matter too much as I then just decided to fuck it and make some rude passes and my gear lever broke and I was stuck in 6th. Finished the session and was well pissed off and was thinking to go home.

I saw Reversecyl Jim and borrowed his spare rearsets which turned out to be a bad idea....fitted them and set the gear linkage up - noticing that the alloy plate of the rearsets was pretty thin and flexy....
went to get radical on the 5th session, struggling to get down the gears (using race shift) at the end of the Park straight and also into Mansfield. I could not then change up easily too - the lever was interfering with the linkage rod and seizing.

The run out of Barn was fast, in 3rd and I tried to get into 4th and it was no-go. the linkage was stuck and as I was revving along at 14.3k revs I gave the lever a tap to get it off the linkage rod...it shifted into 2nd.....

Buzzed the motor, clank and tinkle and whipped the clutch in asap - the engine sezied and died making some horrible noises....oh bollocks says I...knowing full well I'd just booked some quality garage time for myself.

got a ride in the recovery van, first time ever and packed my shit up...not too fucked off at the time, but now, a few hours later and waiting for a chinese (salt and chilli ribs) to arrive and with beer in hand..I am actually really pissed off and knew I should have tested the linkage first and also noted the problems I had had through the first 10 minutes.

SO....great company, nice to see the 400GB posse once again and to give Cadwell a session for over a year...and bad arrows that I broke my gearlever and my engine!

I can see the race bike thread being resurrected!
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
User avatar
skinnydog0_0
NWAA Supporter
NWAA Supporter
Posts: 1212
Joined: Tue Apr 20, 2010 9:07 pm
Bike owned: Penny Farthing
Location: Pembrokeshire West Wales
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by skinnydog0_0 »

Aww Dude thats a real shi**er :( Will you do the engine work or just replace it?
An NC is for life, not just for Christmas!
Dgeoff33
NWAA Supporter
NWAA Supporter
Posts: 342
Joined: Wed Apr 30, 2008 3:46 pm
Bike owned: RVF400 - ZX636
Location: doncaster
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by Dgeoff33 »

I have a couple of vids i'll get up when I learn how to do it!!

Caught a couple of rolling road blocks and the gsxr pilot layed in the track :o

Just going to put some aftersun on my burnt face now :down:
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7160
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by CMSMJ1 »

@ Jeff - I'll rebuild it mate. Why not!! I have the bits and bobs available so will give it a whirl.

@ Geoff - It was fecking sunny eh? Get them vids up, the ones with me looking cool please!
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
reverse cylinder jim
Site Supporter
Site Supporter
Posts: 421
Joined: Sun Feb 28, 2010 5:22 pm
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by reverse cylinder jim »

CMSMJ1 wrote: there were rolling road blocks of dumb tossers that should learn to ride there wannabe racebikes.
Think this sums up the day niceley!
I am in no way a fast rider but how some of the people there class themselves as itermediate riders is beyond me. I will hopefully be getting the footage of the Blade rider crashing in the next couple of days off Mr Edwards, it happened right in front of me and only just missed him as he slid up the track in front of me.
Really nice to meet up with you all again, sorry i wasnt free to chat that much.
Dgeoff33
NWAA Supporter
NWAA Supporter
Posts: 342
Joined: Wed Apr 30, 2008 3:46 pm
Bike owned: RVF400 - ZX636
Location: doncaster
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by Dgeoff33 »

I didn't think it was that sunny (my face is saying different though), definately warm though.

I'll get the memory card to my mate and let him do the uploading, not sure I can make you look cool though. They will be some bruised egos tonight, I don't think people like getting passed by one of them "little" 400s or a fat lad on a scruffy old GSXR.

Definately going to get cracking on the 400 now, there's more fun to be had on one of those.

Don't worry about not chatting James, you were busy.
User avatar
Variablevalves suck
Site Supporter
Site Supporter
Posts: 1922
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by Variablevalves suck »

I have a very red face!
Geoff was nice to meet you and the good lady, thanks for the food, great day out.
Jim, looks like the day paid off for you and you are confident the bike will go faster.
Oh man :down: Mark when we fitted the pegs i was thinking they are going to flex but i never thought a lever would pick up. My heart goes out to you and ive had a drink in memory of the motor.
If you want any help with the new one you know where i am.

:rocks:
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent
Re: Cadwell TD - Mon 13th June £79 - Mini 400GB TD

Post by Drunkn Munky »

Aye up mark, thats crap news mate. I got a spare motor you can use till you get yours built, cant have you off the road all summer.

Look forward to the vids lads, sounds like carnage :lol:

Post Reply