3TK top yoke conversion for high bars
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
plodder
- Familiar Member
- Posts: 286
- Joined: Mon Jul 28, 2008 12:42 pm
3TK top yoke conversion for high bars
Looking to build up my ex-track bike into a runabout and want to raise the bars. Is there a top yoke conversion available to bolt onto that awkward shaped top yoke?
Thanks
Thanks
-
Evilchicken0
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: 3TK top yoke conversion for high bars
You could ..... fit up some different forks which would be higher and then use the cip-ons above the top yoke. You could take it further with raised or adjustable (bar angle) clip-ons keeping the look of the bike.
If not you'll need some long risers and cut them at the angle of the top yoke. That will give you a piece to fit bellow the yoke and locate the bolt on. You could conter bore the bolt hole to suit an allen cap head for a nicer finish and a little more security.
If not you'll need some long risers and cut them at the angle of the top yoke. That will give you a piece to fit bellow the yoke and locate the bolt on. You could conter bore the bolt hole to suit an allen cap head for a nicer finish and a little more security.