My NC30 as it 'stands' after yesterday.

[Peter.H]

theyre off an aprilia rsv 2003

cheers for the help I will investigate and probably have more questions!

[CMSMJ1]

Sneaky google says 5/8 is std for RSV- not sure if someone has one and can confirm.

Get the right m/c though mate, it would be folly not to do this upgrade correctly

[Peter.H]

Sneaky google says 5/8 is std for RSV- not sure if someone has one and can confirm.

Get the right m/c though mate, it would be folly not to do this upgrade correctly

Would that ducati one suffice then?

cheers for the help

[skinnydog0_0]

Not sure, but you could try and get an rsv one, you will know it's the right one then

[CMSMJ1]

As Jeff says - get an RSV one..you know it makes sense!

[skinnydog0_0]

just for comparison, i use standard nc35 calipers and an R6 Nissin master cylinder. not great for the road, but great for the track - it stops you like an iron bar through the front wheel

[Peter.H]

There is an RSV one on ebay for 70 quid

http://cgi.ebay.co.uk/Aprilia-RSV-Mille ... _500wt_922

but it is 70 quid....

[Peter.H]

I asked the seller yesterday about what he had fitted with these brakes -

he said the nc30 m/c was adequate used to dive under braking a bit, he suggested upping the preload. As they work fine with the current m/c I may well wait until a cheap rsv m/c comes up. 82 quid is the cheapest I can find at the moment.

Any more advice is always welcome and appreciated.

[Peter.H]

I'm definitely not a man of my word....rsv m/c purchased today. Lovely lovely.

Advice was greatly appreciated

[skinnydog0_0]

hahaha, get some sbs duel carbon pads and you will make your teeth fall out