How To Video: Replace Fork Seals (Early NC30 forks)

[Sligeach]

As promised the video of how to replace the fork seals in an early type fork.

This is the DIY method and can be undertaken by anyone with basic tools, I have not used any specilaist tools.

1. Allen Keys
2. Ratchet and sockets size 10, 14 and 24mm
3. A vice
4. A broom handle
5. Brake cleaner and rags
6. Misc. items like WD40, wire brush, Semi permenant thread sealant, rubber mallett, rubber gloves

To be honest its not the worlds best guide but better than nothing i suppose. i had to leave bits out as the video needed to be under 10 mins.


make it a sticky if you like

[sil3nt]

Am i missing the video part of this post

Working now thanks a lot!

[uber pikey]

Am i missing the video part of this post

no it's there can't you see it man?

[Delboy]

Stop messing with his mind Curt lol!

[Sligeach]

youtube was being a pain. link fixed now

[porndoguk]

As promised the video of how to replace the fork seals in an early type fork.

This is the DIY method and can be undertaken by anyone with basic tools, I have not used any specilaist tools.

1. Allen Keys
2. Ratchet and sockets size 10, 14 and 24mm
3. A vice
4. A broom handle
5. Brake cleaner and rags
6. Misc. items like WD40, wire brush, Semi permenant thread sealant, rubber mallett, rubber gloves

To be honest its not the worlds best guide but better than nothing i suppose. i had to leave bits out as the video needed to be under 10 mins.




make it a sticky if you like

DIizmZ_OpSY if you put that and then put youtube brackets it will embaed within the post declan,

[Akey]

Thank you very much Sligeach, very helpful as always :-)

[Sligeach]

No problem. Sure what else would i bet at on a 4 day holiday to the west of Ireland.
I have missed out bits but as i said before, gives a bit of food for thought al least.

[pauliealdridge69]

stored in my posts now for future ref!