GK76A carbs HELP
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
dobbslc
- NWAA Supporter
- Posts: 693
- Joined: Fri May 02, 2008 8:06 pm
- Bike owned: 3TJRRSP TRX850 XV750 cafe
- Location: Hertfordshire
GK76A carbs HELP
I need some help with my carbs as the bike is hard to start & runs badly. I've done the engines head gasket as it had blown, valves, shims etc rebuilt the carbs with new O rings I got from variable valves suck but it still runs very rough.
I had some O rings that didn't fit the carbs left over & a couple that were not quite the same as the old ones but assumed they had shrunk or something, is this normal with these O ring kits?
The bike runs cold with bad flat spots so I think it could be the old running rich problem although it helps with the choke on .
Does the choke richen or lean out the mixture?
Any help would be great.
Dobbs
I had some O rings that didn't fit the carbs left over & a couple that were not quite the same as the old ones but assumed they had shrunk or something, is this normal with these O ring kits?
The bike runs cold with bad flat spots so I think it could be the old running rich problem although it helps with the choke on .
Does the choke richen or lean out the mixture?
Any help would be great.
Dobbs
-
Variablevalves suck
- Site Supporter
- Posts: 1922
- Joined: Sat Jan 24, 2009 10:52 am
- Bike owned: GSXR Carb o'ring kits supplied
- Location: Stoke-on-trent
Re: GK76A carbs HELP
Hi Dod,
Pm me as you should'nt have any spare, i will go through it with you.
Chris.
Pm me as you should'nt have any spare, i will go through it with you.
Chris.