Knocking Sound while idling in neutral

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
raybiez
Settled in member
Posts: 7
Joined: Fri Aug 27, 2010 7:03 am
Knocking Sound while idling in neutral

Post by raybiez »

Hi

Will a worn clutch bearing cause a knocking sound while idling in neutral (1989 SP - GK73A)? If I press the clutch level, the sound gets more faint. I want to replace the friction plates & springs, but would like to replace the bearings as well if that is the cause of the problem.

Thanks
Marcus127nc29
Settled in member
Posts: 80
Joined: Tue Aug 04, 2009 8:06 pm
Bike owned: nc29,mc19,er6,gpx250,kx125
Location: evesham
Re: Knocking Sound while idling in neutral

Post by Marcus127nc29 »

yerh its just the clutch plates and basket worn should be fine few of my old bikes do it
raybiez
Settled in member
Posts: 7
Joined: Fri Aug 27, 2010 7:03 am
Re: Knocking Sound while idling in neutral

Post by raybiez »

Thanks for the response, do you mean the metal plates that go between the friction plates? If so, replacing them as well will resolve the issue...
Neilos-888
Settled in member
Posts: 5
Joined: Thu Dec 23, 2010 8:38 pm
Re: Knocking Sound while idling in neutral

Post by Neilos-888 »

yea mine rattles when its sat idling almost like a snatching noise, when riding and let off throttle it seems to clutch slip too. seems fine through gears and doesn't slip when accelerating seemingly.

I've just dropped the engine out cos i got a spare and couldn't figure/be arsed to find out what was wrong with it. but if someone knows i'd love to sort it out as i know my old engine was well thrashed and i remember it started using quite a drop of oil!
User avatar
thunderace
Site Supporter
Site Supporter
Posts: 1584
Joined: Fri Sep 10, 2010 9:03 pm
Bike owned: R6, YZF600R
Location: Blackburn, Lancs.
Re: Knocking Sound while idling in neutral

Post by thunderace »

raybiez wrote:Thanks for the response, do you mean the metal plates that go between the friction plates? If so, replacing them as well will resolve the issue...
You are probably looking at a new clutch basket eventually, the 'fingers' will be wearing out. The friction plates and spacer plates have a castellated rim. These castellations fit in between the fingers of the basket. Over time and with a good amount of use, the rotational forces going through the clutch will wear the fingers down so that the gap between the fingers and the castellations gets larger.

You might want to check the gaps against the factory tolerance level.
Conventional wisdom says to know your limits. To know your limits you need to find them first. Finding your limits generally involves getting in over your head and hoping you live long enough to benefit from the experience. That's the fun part.

Post Reply