Red/ Green Chain Adjuster Swingarm Sticker

[jb1000rr]

Hi All,

I'm in the process of restoring an NC30.

The swingarm has been sent to the paint shop and when it comes back it will need new stickers. I've already got the Elf Pro arm sticker but I'm trying to track down a new Chain Adjuster sticker. The small one with the Red and Green markings on it. Does anyone know where I can get hold of a new one?

All help gratefully received, thanks.

[BillingCBR]

it's for an RC30, but the others seem to match up :)

http://cgi.ebay.co.uk/HONDA-RC30-VFR750 ... 3eff322e71

[Peteo]

Sorry to hi jack this thread but does anybody have a photo of the exact position of this sticker?
I managed to get one off fleabay but dont know where it goes!!!!!!!
Cheers guys!!

[arsey30]

The label would normally be fitted when new chain/sprockets are fitted, so that the point of the sprocket teeth line up with start of the green marking.
In practice, this will be the same position unless different sprockets/chain length are used.

Dave.

[jb1000rr]

Thanks for your help and the ebay link.

[BillingCBR]

Thanks for your help and the ebay link.

no worries, I can go check my NC to see if the RC decal is the same if you want, just say and I'll look tomorrow when it's light and let you know

[superlite]

FWIW mine look the same as the RC30 one, but have Japanese text (being Jap import NC30s).

[Japan]

Where did you get the Elf France one?

[arsey30]

Where did you get the Elf France one?

Honda part number 87521 ML0 731.

[jb1000rr]

Thanks for your help and the ebay link.

no worries, I can go check my NC to see if the RC decal is the same if you want, just say and I'll look tomorrow when it's light and let you know

I've had a look on the ebay link and it would appear from the image that the RC30 decal is different from the NC30's. I would be grateful if you could check it out for me once it's light.