Modification on 3TJ CDI
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
plodder
- Familiar Member
- Posts: 286
- Joined: Mon Jul 28, 2008 12:42 pm
Modification on 3TJ CDI
On my track 3TJ, the CDI had a lump on the front fo the case like someone's been in there and plastic welded it up. Any thoughts as to what it's likely to be? I'll get a picture if it clarifies things.
-
thunderace
- Site Supporter
- Posts: 1584
- Joined: Fri Sep 10, 2010 9:03 pm
- Bike owned: R6, YZF600R
- Location: Blackburn, Lancs.
Re: Modification on 3TJ CDI
Sounds like it has been modded to alter the ignition timing and increase HP.
-
bendy3
- Settled in member
- Posts: 173
- Joined: Thu Jul 10, 2008 5:11 pm
- Bike owned: FZR400RRSP FZR400 HYBRID RRSP
Re: Modification on 3TJ CDI
Hi, would need a pic to see what it is.
-
plodder
- Familiar Member
- Posts: 286
- Joined: Mon Jul 28, 2008 12:42 pm
Re: Modification on 3TJ CDI
LOL, CDI is buried under the rear seat bracket & plastics and bike is buried under the workbench, so can;t get at it without major hassle.
Artist's impression is the best I can do. The red circle is raised about 3mm. The red line looks like it's been plastic welded (not really raised). Turns out this bike was a cat C and converted to a track bike. Perhaps it was used as a racebike for a while as it was pared down.
Artist's impression is the best I can do. The red circle is raised about 3mm. The red line looks like it's been plastic welded (not really raised). Turns out this bike was a cat C and converted to a track bike. Perhaps it was used as a racebike for a while as it was pared down.