PLEASE HELP AT MY WITS END GSXR 400 SP (none starter)

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
martinstephensons
Settled in member
Posts: 14
Joined: Sat Jul 31, 2010 2:06 pm
Re: PLEASE HELP AT MY WITS END GSXR 400 SP (none starter)

Post by martinstephensons »

hi there yes got the orings from you all put in correct i have had the carbs out 3 or 4 times and checked everything again but still will just not fire.

sounds like it wants to fire but drains the battery before it will start. have checked all the plugs are firing but not sure if they are sparking enough.

got the plugs set to 1.5 turns out not sure how to adjust the float as i havent touched these before.

i believe the floats have to be set to 20mm is this correct?

it will be a great shame to strip it cause the bike is in mint condition. if i knew it was definatley the carbs i wiould pay someone to set them up for me.

but just didnt want to spend £200 to have the carbs set up and it wasnt them in the first place.

ANY HELP AT ALL WOULD BE VERY MUCH APRECIATED. I HAVE SPOKE TO STRIPES AND HE HAS RUN THROUGH A FEW STUFF TO CHECK WHICH I HAVE DONE PUT STILL THE SAME.

Post Reply