Swingarm Bolt - Stuck

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Callist
Settled in member
Posts: 25
Joined: Sat Aug 07, 2010 5:05 pm
Swingarm Bolt - Stuck

Post by Callist »

GSXR 400 73A..

The bolt on the swingarm which meets the main frame is stuck! I have taken the nut and wash off, but it will not budge at all! any ideas how to get this off? Thanks.
morris147
NWAA Supporter
NWAA Supporter
Posts: 248
Joined: Sat Apr 25, 2009 11:08 pm
Re: Swingarm Bolt - Stuck

Post by morris147 »

Soak it in plus gas, then use a hammer and screwdriver or equivilent to tap the pin out.
stripes1976
Familiar Member
Posts: 399
Joined: Sun Jun 01, 2008 7:14 pm
Bike owned: 6 gk76a's, nc29
Location: 76a mod shop
Re: Swingarm Bolt - Stuck

Post by stripes1976 »

on the 73a has the bolt got a bolt head on it? If it has give it a turn then use a drift to knock it out. Make sure the drift is softer that the bolt so not to damage it. Wood, nylon or aluminium is ideal for a drift material.
stripes1976
Familiar Member
Posts: 399
Joined: Sun Jun 01, 2008 7:14 pm
Bike owned: 6 gk76a's, nc29
Location: 76a mod shop
Re: Swingarm Bolt - Stuck

Post by stripes1976 »

also have you removed the rear shock? If not there will be tension on it stopping it coming out
Callist
Settled in member
Posts: 25
Joined: Sat Aug 07, 2010 5:05 pm
Re: Swingarm Bolt - Stuck

Post by Callist »

I am working with the Frame and Swingarm stripped down. There is no suspension or anything else. Just a bare frame and swingarm at the moment. The pivot bolt is very jammed in! I have tried everything and it just wont move... It looks like a job of cutting it off now.

Post Reply