520 chain

[Evilchicken0]

I,ll see what mine looks like Boris. back in an hour.

[hipringle]

sorry mate I tried & tried to get the stinking nut off but its just spinning the back wheel & I,m struggling by myself. Later I,ll try the 3en2 as the cover looks the same, I,ll try & get that nut off.

[oollit]

Pulled my sprocket cover off my tj and this is what it looks like...nice and easy job with a zip gun HP.



The sprocket does have a shoulder on the outside but i can't see if there is a shoulder on the inside without taking the chain off.

Th sprocket nut has a recess which should face into the sprocket, if it was fitted the wrong way around there would be a lot of play on the sprocket.




Hope this helps

[hipringle]

good work Oolit, chains a bit dry, I have an excuse

[oollit]

Yeah, i got an excuse too, bike has not run for 15 months.

Blown engine + no free time to fix it = buy a CBR 600

[Evilchicken0]

Ta chaps - I'll try and find some time to have a look at the TJ

[nick]

The sprockets I've got have a shoulder on both sides, if that helps?

[Taggyd]

i know my nut comes off on the tj, found it in the belly pan! oops! i'll look wile i look for that headlight thingy for 007 tomorrow!