NC30 Rebuild

[matt_nc30]

Ive had my NC30 just over a near now, and always wanted to strip it down, and rebuild it from the ground up. Now that it isnt my only bike im going to do it.

How it is now.



will add pics along the way and probably many questions!

[Drunkn Munky]

Nice bike, like those rearsets, gillies??

Keep the colour scheme and paint the wheels gold

[matt_nc30]

Shes going to be spending the next few months in here





Theres just enough room to work on it for now. I think il need more room when i need to start pulling the big bits off though.

Nice bike, like those rearsets, gillies??

Rear sets are SES, didnt know u could get gillies for the NC30?



Half of the exhaust off



Any one got any tips on how to get a mirror shine on it? Never really polished metal before.


& the engine is not going to be run for a while now seeing as its going to be pulled from the bike. Do i need to do anything to it before i leave it stand?


Cheers

[ibby4585]

Is that a Mercury exhaust system?? I wouldnt polish i would just leave it and let it colour nicely with the heat! By the way why are your mirrors on upside down??

[matt_nc30]

Its a tyga system.

I had to take them off to get the bike out the back, and putting them on in the dark resulted in them being upside down

[ibby4585]

it looks nice, i wouldnt try and shine it up just give it a quick rub down with a polishing cloth and leave it!

Kris

[leef82]

wrong time of the year for a rebuild, im doing the same 2mine, started it 2months ago and now have run out of money, drives me mad bein without it and seeing bikes come past me on the way back from work

[hardnutdvd]

wrong time of the year for a rebuild, im doing the same 2mine, started it 2months ago and now have run out of money, drives me mad bein without it and seeing bikes come past me on the way back from work

he said it aint his only bike so i guess he aint too bothered....he may be one of the bikers hooning it past ya on your way back from work!

keep updating with pics though matt, would be good to see it step by step..

[matt_nc30]

Yeah not my only bike now, bought an R1, doesnt make me feel how the NC does though

Didnt get around to alot today, managed to get the subframe off and a few other bits.





Its looking a rite mess underneath the body work, and the loom looks to be in a rite state.

Tomorow im going to get all the bodywork off, cooling system, clocks, clip-ons and all that, the rest of the exhaust and the loom, i just hope it isnt going to be too hard.

[ibby4585]

What front calipers are they Matt?

Kris