3TJ CDI Derestricting
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: 3TJ CDI Derestricting
The top speed is restricted by the CDI. It recieves a signal from the speedo at 0kmh to reset it or it will restrict the engine in all gears, and 180kmh where it cuts the spark to the engine.also how are the 3tj's top speed restricted?
-
- Settled in member
- Posts: 85
- Joined: Tue Apr 27, 2010 7:06 pm
- Bike owned: Honda NC30 & Tiger Sport
- Location: East Yorks
Re: 3TJ CDI Derestricting
Hi guys,
I have a 4dx (3TJ), will this be restricted or full power? What mph top speed should I achieve as stock, any ideas?
I have a 4dx (3TJ), will this be restricted or full power? What mph top speed should I achieve as stock, any ideas?
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: 3TJ CDI Derestricting
The 4DX (European model) is not resricted. Expect about 125mph ... I think. It depends on the speedo a bit too.
-
- Settled in member
- Posts: 85
- Joined: Tue Apr 27, 2010 7:06 pm
- Bike owned: Honda NC30 & Tiger Sport
- Location: East Yorks
Re: 3TJ CDI Derestricting
I was pulling around 115mph at Cadwell before running out of straight! So that sounds about right as there were still revs to spare. Once my valve clearances are sorted and the carbs balanced 125mph should be achievable easy enough. 

-
- Settled in member
- Posts: 15
- Joined: Thu Mar 18, 2010 10:55 am
Re: 3TJ CDI Derestricting
just had cdi derestricded wow what a bike now bendy is a star man it has transformed the bike no end made an old man very happy bendy been a realy good lad helped me a lot with jetting ect and by the way he can ride a bike to saw him at oulton well sortted bike well ridden 10 out of 10
-
- Settled in member
- Posts: 173
- Joined: Thu Jul 10, 2008 5:11 pm
- Bike owned: FZR400RRSP FZR400 HYBRID RRSP
Re: 3TJ CDI Derestricting
Thanks Alfie.
-
- Familiar Member
- Posts: 286
- Joined: Mon Jul 28, 2008 12:42 pm
Re: 3TJ CDI Derestricting
I have a 3TJ track bike that I had some trouble with (it could have been the CDI restricting but the water pump was damaged, so not really sure yet) but am intererested in doing this if it makes sense.
Now as far as I know the engine is stock, so is giving it the increased RPM safe for the einge or are there mods required.
I have a M-max box too so may just put that on and leave it at that.
Now as far as I know the engine is stock, so is giving it the increased RPM safe for the einge or are there mods required.
I have a M-max box too so may just put that on and leave it at that.
-
- Site Supporter
- Posts: 5374
- Joined: Tue Apr 29, 2008 8:59 pm
- Bike owned: Bimota SB6 Yamaha FZR 3TJ x2
- Location: Lundin Taan
Re: 3TJ CDI Derestricting
The CDI puts a speed restriction on the bike, it cuts the spark to one or two cylinders to do it.
Not sure how it cuts when it doesn't get the 0 khm / mph signal but I'd imagine it's the same and it should come in around 12500rpm.
So deresticting the CDI shouldn't change how it makes it's power just add to the top end in all / or top gear. The M-Max box should do the same thing.
I don't know if either of these takes out the rev-limiter at 15500rpm
Not sure how it cuts when it doesn't get the 0 khm / mph signal but I'd imagine it's the same and it should come in around 12500rpm.
So deresticting the CDI shouldn't change how it makes it's power just add to the top end in all / or top gear. The M-Max box should do the same thing.
I don't know if either of these takes out the rev-limiter at 15500rpm
-
- Settled in member
- Posts: 173
- Joined: Thu Jul 10, 2008 5:11 pm
- Bike owned: FZR400RRSP FZR400 HYBRID RRSP
Re: 3TJ CDI Derestricting
Dont know about m-max box but de-restricting takes the rev limit higher, I've reved mine to 15k+ on track but not recomended, Generally 14k max.
-
- Settled in member
- Posts: 20
- Joined: Wed Aug 11, 2010 7:20 pm
Re: 3TJ CDI Derestricting
thanks for the cdi stuart, worked just the same as my other race one before it went pop. may send you my broken one to see if its repairable...! 
