NC29 Carb mixture screw?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: NC29 Carb mixture screw?
Bike still no run...
Clear all bolt and nut in carb today.
Are the pilot jet should be tigthen or are there some settings for tigthening? I can find any info about this in Manual.
Clear all bolt and nut in carb today.
Are the pilot jet should be tigthen or are there some settings for tigthening? I can find any info about this in Manual.
-
PARUS
- Senior Member
- Posts: 1160
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: NC29 Carb mixture screw?
Finally set up carb prorely.
Pilot screw = 1 1/2 turns
Neddles - Kenso\Bakudan jet kit clip ste up on the second position from top. I'm little down needles, because bike mainly use for road purpose
Main jet - 110/105/105/110
This setting works for me.
Pilot screw = 1 1/2 turns
Neddles - Kenso\Bakudan jet kit clip ste up on the second position from top. I'm little down needles, because bike mainly use for road purpose
Main jet - 110/105/105/110
This setting works for me.