rvf and vfr cranks, are they same?

Post by **Spike16** » Sun Jun 06, 2010 5:35 pm

just wondering I know the gearbox heads and pistons are all different but are things like the crank and rods the same and interchangable?

Post by **abrmoto** » Sun Jun 06, 2010 5:46 pm

Yes as far as I am aware they are the same. Rods n pistons differ but crank is the same.

Post by **Spike16** » Mon Jun 07, 2010 2:38 pm

rods are different? ah how so? I thought it was just that the pistons were crowned to up the compresion?

Post by **Neosophist** » Mon Jun 07, 2010 2:48 pm

Spike:

http://downloads.hondatech.info/Moto/NC ... ofiche.pdf

NC35 microfiche

http://www.cmsnl.com/vfr400r3m-1991-e_m ... /?q=vfr400

NC30 microfiches :)

Only have to look and see if the part numbers are the same...

According to those I see that the Rods are the same..

13210ML0020 - Front bank

13220ML0020 - Rear Bank.

It's interesting to note that ML0 is an NC2x Part number...

NC2x's from From Serial#: 1082547 share the same Rods as the NC30 / NC35 :)

Post by **Spike16** » Mon Jun 07, 2010 4:36 pm

yeh I knew they were different front and back but was sure they were interchangable

Cheers

Post by **abrmoto** » Mon Jun 07, 2010 5:04 pm

abrmoto wrote:Yes as far as I am aware .

Only trying to help.

Post by **Spike16** » Mon Jun 07, 2010 11:39 pm

no worries dude much apreciated

rvf and vfr cranks, are they same?

rvf and vfr cranks, are they same?

Re: rvf and vfr cranks, are they same?

Re: rvf and vfr cranks, are they same?

Re: rvf and vfr cranks, are they same?

Re: rvf and vfr cranks, are they same?

Re: rvf and vfr cranks, are they same?

Re: rvf and vfr cranks, are they same?