charging issues...again
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: charging issues...again
YTX7 is the Standard Fitment on NC30, you can fit the YTX9 which is a slightly larger.. i think the YTX9 is actually 8ah vs 6ah for the YTX7.Old Painless wrote:That thread just says to get the 9AH rather than something smaller, 9AH is the standard fitment iirc.
Fitting a larger battery may help if you idle for long periods of time with the lights on (as the altenator wont' be charging the battery at idle)
But it shouldn't be a substitue for a knackered charging system.
Was this 25v when the bike was running? This indicated a busted reg/rec.
Fit a newer R6 reg/rec to the bike. This should solve most of your charging problems.
Be sure to test the altenator before you resign it to the scrap-heap.
Best place to get altenators from is Electrexworld.. (they have a website) i think it's part number G72 but there easy to find on the website.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...