Bit soft up front (nc24 forks)

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Lope
Site Supporter
Site Supporter
Posts: 197
Joined: Thu May 22, 2008 1:37 pm
Re: Bit soft up front (nc24 forks)

Post by Lope »

I've put about 0.75 bar in my front forks (NC24) with a bicycle pump and it has made a massive improvement just judging by pushing down on the forks. It seems to only compress half as far with the same push.
I'm glad my mech told me to use a bicycle pump! just about 4-5 hard pumps on a large bicycle hand pump gets one of the forks up to 1.5 bar! It could be game over very quickly if you use compressed air. It really is a very small space to pump up.
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: Bit soft up front (nc24 forks)

Post by Neosophist »

Haha! Oops, I forgot to say that you only need 1 pump on a small bicycle pump!
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
User avatar
spooky
Site Supporter
Site Supporter
Posts: 429
Joined: Wed Apr 30, 2008 8:37 pm
Bike owned: nc24
Location: Newtownards Co.Down N.Ireland
Re: Bit soft up front (nc24 forks)

Post by spooky »

Hey Lope has it made much difference to the handling off the bike since you put air into your forks?
\That wee smilie can drink some Guinness. No wonder he's yellow.

Post Reply