throttle and clutch cable routing?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
User avatar
oliherst
Settled in member
Posts: 160
Joined: Tue May 06, 2008 8:36 am
Location: Surrey, UK
Re: throttle and clutch cable routing?

Post by oliherst »

Overflows dude....was thinking earlier today actually, should prob have said before, I don't know that these cables are right, but it is how my bike is done and it all works :D

Do you need more info about them? Bike is still in parts in the garage :P
Image
User avatar
yayoboy
Settled in member
Posts: 189
Joined: Wed May 14, 2008 9:33 pm
Location: Stourbridge, West Midlands
Re: throttle and clutch cable routing?

Post by yayoboy »

yeah m8, if you could just let me know where the other overflow goes, i know the one goes to the bottom of the air box but what about the other? cheers oli :D
91 nc30, 97 cr 250, 98 rm 250, still need more!
User avatar
TonyB
Site Supporter
Site Supporter
Posts: 54
Joined: Wed Apr 30, 2008 9:04 pm
Bike owned: NC30, CBR900RRY
Location: Gateway to Cornwall
Re: throttle and clutch cable routing?

Post by TonyB »

Yayo, you got mail! :D
User avatar
oliherst
Settled in member
Posts: 160
Joined: Tue May 06, 2008 8:36 am
Location: Surrey, UK
Re: throttle and clutch cable routing?

Post by oliherst »

TonyB wrote:Yayo, you got mail! :D
Does that mean you answered his question? ;)
Image
User avatar
yayoboy
Settled in member
Posts: 189
Joined: Wed May 14, 2008 9:33 pm
Location: Stourbridge, West Midlands
Re: throttle and clutch cable routing?

Post by yayoboy »

still need to know what the other overflow is, not the air box one :D
91 nc30, 97 cr 250, 98 rm 250, still need more!
User avatar
TonyB
Site Supporter
Site Supporter
Posts: 54
Joined: Wed Apr 30, 2008 9:04 pm
Bike owned: NC30, CBR900RRY
Location: Gateway to Cornwall
Re: throttle and clutch cable routing?

Post by TonyB »

oliherst wrote:
TonyB wrote:Yayo, you got mail! :D
Does that mean you answered his question? ;)
No!
I just emailed him the pdf of the pages from the Honda manual which shows where the various pipes and things go quite nicely.
User avatar
TonyB
Site Supporter
Site Supporter
Posts: 54
Joined: Wed Apr 30, 2008 9:04 pm
Bike owned: NC30, CBR900RRY
Location: Gateway to Cornwall
Re: throttle and clutch cable routing?

Post by TonyB »

yayoboy wrote:still need to know what the other overflow is, not the air box one :D
That will be one of the vent pipes from the tank vent. It comes from the non-return valve round the front of the airbox and splits into two on the left hand side. It shows it clearly on the pictures I sent you. Top picture on page 1-23.
User avatar
yayoboy
Settled in member
Posts: 189
Joined: Wed May 14, 2008 9:33 pm
Location: Stourbridge, West Midlands
Re: throttle and clutch cable routing?

Post by yayoboy »

got it cheers :D
91 nc30, 97 cr 250, 98 rm 250, still need more!
User avatar
yayoboy
Settled in member
Posts: 189
Joined: Wed May 14, 2008 9:33 pm
Location: Stourbridge, West Midlands
Re: throttle and clutch cable routing?

Post by yayoboy »

doesnt look like they were ever fitted to my bike, the pipe from the tank breather went down the side of the rads, and aint got one of those splitters at the back of the carbs....
91 nc30, 97 cr 250, 98 rm 250, still need more!
ryancusick
Settled in member
Posts: 34
Joined: Thu Jun 26, 2008 11:43 pm
Location: Belfast, N.I.
Contact:
Re: throttle and clutch cable routing?

Post by ryancusick »

would you still happen to have this video. went to put my bike back together and got to the trottle cables i realised i had no idea which way they went on.

Post Reply