Need your help please!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
turbo tel
- Settled in member
- Posts: 22
- Joined: Sun May 02, 2010 2:35 pm
Need your help please!
Hi there please help.
I took my bottom end of fairing off to take a look at the engine and a better look at the whole exhaust.
Engine looks very clean but I wish I could say the same for the middle section of the exhaust where the front joins to the rear it's completley rusted, and the collars have rusted and broken off.
The rest of the exhaust is in good condition and standard.
Sorry don't want sound stupid, what is the best way to take it off really don't want to snap anything 
I took my bottom end of fairing off to take a look at the engine and a better look at the whole exhaust.
Engine looks very clean but I wish I could say the same for the middle section of the exhaust where the front joins to the rear it's completley rusted, and the collars have rusted and broken off.
The rest of the exhaust is in good condition and standard.
Sorry don't want sound stupid, what is the best way to take it off really don't want to snap anything -
skinnydog0_0
- NWAA Supporter
- Posts: 1213
- Joined: Tue Apr 20, 2010 9:07 pm
- Bike owned: Penny Farthing
- Location: Pembrokeshire West Wales
Re: Need your help please!
Hi,
rotting exhaust joints between the front down pipes and rear collector is a very common issue with nc's i think you will probably have to get the collers on the collector re welded. Unless you are lucky and can get them apart without them falling to bits.
rotting exhaust joints between the front down pipes and rear collector is a very common issue with nc's i think you will probably have to get the collers on the collector re welded. Unless you are lucky and can get them apart without them falling to bits.