Please help, carb O-ring sizes required!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Neve24
- Settled in member
- Posts: 10
- Joined: Tue Mar 16, 2010 7:36 am
Please help, carb O-ring sizes required!
I am from South Africa so importing the o-ring can be quiet expensive. Can you please help with the o-ring sizes as I am trying to source them locally to save cost.
From Tony sleep website I got this list, please advise if correct
ID Cross section OD Hardness Quantity
Main jet 6.07mm 1.78mm 9.63mm 75°Shore'A' 4
Float perch 7.65mm 1.78mm 11.21mm 75°Shore'A' 4
Slide holder 10mm 1mm 12mm 75°Shore'A' 4
Idle screw 2.5mm 1mm 4.5mm 75°Shore'A' 4
Are there any additional seals/o-rings I should get?
Many thanks
Nevashen
From Tony sleep website I got this list, please advise if correct
ID Cross section OD Hardness Quantity
Main jet 6.07mm 1.78mm 9.63mm 75°Shore'A' 4
Float perch 7.65mm 1.78mm 11.21mm 75°Shore'A' 4
Slide holder 10mm 1mm 12mm 75°Shore'A' 4
Idle screw 2.5mm 1mm 4.5mm 75°Shore'A' 4
Are there any additional seals/o-rings I should get?
Many thanks
Nevashen
-
CMSMJ1
- Moderators
- Posts: 7161
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: Please help, carb O-ring sizes required!
One of your GSXR brothers will be along shortly.... he sells the kits at a superb price..so might be worth your while getting them from him.
Welcome to the site
Welcome to the site
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate