Turning over now - wont fire

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
luckybiker2010
Settled in member
Posts: 6
Joined: Tue Feb 16, 2010 1:16 pm
Re: Turning over now - wont fire

Post by luckybiker2010 »

:( would a workshop manual for a gsx 400f be of any use?
Top
User avatar
Variablevalves suck
Site Supporter
Site Supporter
Posts: 1922
Joined: Sat Jan 24, 2009 10:52 am
Bike owned: GSXR Carb o'ring kits supplied
Location: Stoke-on-trent
Re: Turning over now - wont fire

Post by Variablevalves suck »

luckybiker2010 wrote:I have checked it and the fuses are fine, the relay switch is working fine too, the kill switch is good as it attempts to turn over, there is no voltage getting to the coils and there is about 175 Ohm at the signal generator. Is this the problem or does it not matter?

Matt
Hi Matt.
The 400F is very different and you should have between 80 and 120 ohms at the pickup.
Top
Post Reply

Return to “Suzuki - Workshop”