NC24 Fuel tap, where does vacuum go?

Delvey · Post by **Delvey** » Sun Jun 29, 2008 4:43 pm

right, decided to give my tank a good clean (bits of rust around the the tap, lock etc) with wd 40, however when im going to put it back on, i have a problem.
i know where the fuel line goes onto, but what about vacuum hose?
there is a place to connect it above the fuel hose, or at a 90 degree angle clockwise to it facing down?
haynes says the one above the fuel line, however that is for an nc30

castrol101 · Post by **castrol101** » Sun Jun 29, 2008 7:53 pm

Its the one pointing directly downwards on the 24 :)

Delvey · Post by **Delvey** » Sun Jun 29, 2008 7:54 pm

cheers, whats the other for then, above the fuel line

castrol101 · Post by **castrol101** » Mon Jun 30, 2008 10:16 am

I'm not actually sure, but i think it might just be a breather?? Theres nothing attatched to mine either.

Post by **Neosophist** » Wed Aug 27, 2008 9:53 pm

It's what lets the diaphragm go back 'in' to block the fuel off when there is no vaccumn anymore.

NC24 Fuel tap, where does vacuum go?

NC24 Fuel tap, where does vacuum go?

Re: NC24 Fuel tap, where does vacuum go?

Re: NC24 Fuel tap, where does vacuum go?

Re: NC24 Fuel tap, where does vacuum go?

Re: NC24 Fuel tap, where does vacuum go?